stuck again.
#1
Registered
Thread Starter
Join Date: Oct 2002
Location: tropical Cleveland OH
Posts: 3,284
Likes: 0
Received 0 Likes
on
0 Posts
stuck again.
My boat sits on a 98 quickload alum. trailer. with the pvc guide uprights that mount the lights. And I need a new upright for the one side. It is 1.5" pvc schedule 20 5 foot long. Since code for plumbing is schedule 40 I can't find 20 ANYWHERE. Does anyone have a piece laying around.
#3
VIP Member
iTrader: (1)
Re: stuck again.
Go to the local Home Depot. They will have it. You might have to buy a 10 foot section, but they can cut it down to the exact size right there in the store.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#4
Registered
Join Date: Nov 2000
Location: Grand Haven, MI USA
Posts: 3,124
Likes: 0
Received 0 Likes
on
0 Posts
Re: stuck again.
the schedule doesn't matter, just get a pice that looks like it. Its all the same in terms of OD. Don't make this so difficult that we need to hit you in the head with a piece of this stuff. Oh yea
#5
Registered
Thread Starter
Join Date: Oct 2002
Location: tropical Cleveland OH
Posts: 3,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: stuck again.
Originally Posted by MitchStellin
the schedule doesn't matter, just get a pice that looks like it. Its all the same in terms of OD. Don't make this so difficult that we need to hit you in the head with a piece of this stuff. Oh yea
Bigwavs: no luck I've checked home depot, Lowes, every plumbing suppliuer in northern OH, no luck.
#7
Registered
Thread Starter
Join Date: Oct 2002
Location: tropical Cleveland OH
Posts: 3,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: stuck again.
Thanks Dave, Your boat looks awsome, sweet updates. I'd love to go for a ride. Thanks for your upholstry guys #. I callled him yesterday.
#8
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Re: stuck again.
McMaster doesn't even carry the stuff. I know that sched 20 is occasionally used for 4" drain tile, but I don't know where you will get sched 20 1.5" I'd have to suggest a local plumbing wholesaler. They if they don't have it in stock, they proably won't order you a single length either.
#10
Registered
Re: stuck again.
I made mine from Stainless Steel exhaust tubing and then took a piece of 2.25" pvc and slid it over the top of the tubing. It works great when loading the boat. If I bump the uprights the pvc just spins over the ss tubing.