MYTHBUSTERS...........On 500EFI valve springs
02-14-2006, 07:39 AM
#21
Registered
VIP Member
Re: MYTHBUSTERS...........On 500EFI valve springs
I just did the job for Brad Schoenwald. I first scanned the computers for codes, then did a compression test on warm engines with wide-open throttles.
Entire job took 10 hours and the springs were about $500.00.
Entire job took 10 hours and the springs were about $500.00.
02-14-2006, 08:15 AM
#22
Registered
Join Date: Jan 2004
Location: Reedville, va. Chesapeake Bay
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
Re: MYTHBUSTERS...........On 500EFI valve springs
Isky toolroom springs, retainers and keepers,1000.00,I did mine last year @200 hr the springs were weak, head gaskets were about to blow "verry thin between cyls. 2000efis.
02-14-2006, 08:30 AM
#23
Re: MYTHBUSTERS...........On 500EFI valve springs
I just replaced mine on a 2000 hp500 carb. 350hrs on the engines, and not 1 broke spring. definately pushing it on a carb and those amount of hours. my head gaskets were about to go as well.
02-14-2006, 08:30 AM
#24
Geronimo36
Gold Member
Re: MYTHBUSTERS...........On 500EFI valve springs
Originally Posted by Downtown42
Boats cannot be compared to mileage. There is way more load and stress on a boat motor. If you want to sell the boat, depending on agreed price, do what the buyer wants and be done with it. Arguing with him will kill your deal.
02-14-2006, 01:05 PM
#25
BRAD SCHOENWALD
Platinum Member
Re: MYTHBUSTERS...........On 500EFI valve springs
Originally Posted by Edward R. Cozzi
Entire job took 10 hours and.
10 Hours?? We were having so much fun it felt more like two!
Thanks Mr. Cozzi
02-14-2006, 06:06 PM
#26
Registered
VIP Member
Re: MYTHBUSTERS...........On 500EFI valve springs
Originally Posted by bcschoe
10 Hours?? We were having so much fun it felt more like two!
Thanks Mr. Cozzi
Thanks Mr. Cozzi
Brad is a great helper and if he wasn't there 10 hours would never be enough to do it like we did.
Racer
02-14-2006, 09:04 PM
#28
BRAD SCHOENWALD
Platinum Member
Re: MYTHBUSTERS...........On 500EFI valve springs
Originally Posted by Edward R. Cozzi
If it ever warms up around here I am looking forward to our shake-down cruise.
Sorry Ed-We ran Sunday--I know, it was wicked cold and the wind was about 20-25 kts so I busted out my old Alaska wear. My neighbor still thinks I'm nuts but I didn't want to wait and with the wind out of the NW it gave us a decent lee close to the beach. "Tubbs" and I ran out of Port Everglades and everything is good, it was a little rough but we were able to run WOT for a bit and got great numbers for the conditions.
Thanks again and call me anytime so I can get you back out...
Thread
Thread Starter
Forum
Replies
Last Post
BAJA WILL
General Boating Discussion
3
04-10-2003 09:32 PM
