Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Cost to have a #6 drive repainted (https://www.offshoreonly.com/forums/general-boating-discussion/82016-cost-have-6-drive-repainted.html)

Dueclaws 06-24-2004 07:24 PM

Cost to have a #6 drive repainted
 
I'm trying to get an idea of what "market" is to have 2- #6 legs and gimbals, with very mild corrosion, repainted in black Imron. Mine have been done and I'm trying to justify the bill received from the paint shop.

Once I receive some input, I'll tell you what I was billed. :eek: Thanks!
Due

open87 06-24-2004 09:03 PM

Re: Cost to have a #6 drive repainted
 
paint labor rate here in new orleans is 38.00 hr. if parts needed to be blasted ,epoxyed, primed,sanded, painted etc and you wanted 1st class i would charge per hr that i worked on them so , without seeing them i'd say around 1200.00 .

glassdave 06-24-2004 09:50 PM

Re: Cost to have a #6 drive repainted
 
i have been doing high end graphics and custom finishes for some time now and for a top shelf job $1000.00-1200.00 (i agree open72 :D) for the pair would be about right. we are talking blasted, filled and finished as new. you'll probably have close to $200 just in meterials.

open87 06-25-2004 10:02 AM

Re: Cost to have a #6 drive repainted
 
1951.08??? now the price i said is not set in stone and could run you that much. it's possible that glassdave or myself would have came in higher but without seeing how bad the corrosion was ,that was ballpark. those drives are heavy and somewhat bulky. without the proper stands they can be a real pita. post a pic if possible.

ERIC

WickedWon 06-25-2004 10:31 AM

Re: Cost to have a #6 drive repainted
 
Corroded saltwater assemblies, brought back to "like new finish" cost $800 - $1000 each, had a friend learn the hard way when he got a "deal" on a used set, they did look good when the guy got done.

Dueclaws 06-25-2004 11:33 AM

Re: Cost to have a #6 drive repainted
 
The drives had minimal corrosion, so that's not the problem. They really didn't need much prep.
Due

hugetime1 06-25-2004 12:09 PM

Re: Cost to have a #6 drive repainted
 
i'd say about 50 bucks, 1 gal of latex exterior black paint $40
1 roller $5
1 small brush $2.50
A few sheets of sand paper $2.50
people that get away with charging 2 grand to put some black paint on a drive.....PRICELESS

Shane 06-25-2004 01:24 PM

Re: Cost to have a #6 drive repainted
 

Originally Posted by hugetime1
i'd say about 50 bucks, 1 gal of latex exterior black paint $40
1 roller $5
1 small brush $2.50
A few sheets of sand paper $2.50
people that get away with charging 2 grand to put some black paint on a drive.....PRICELESS


1 Landwalrus to slop the paint on....2,000 lbs.

Garage floor to support the landwalruses fat ass.....12 inches of concrete

Food to keep him fed for the one day job....out of your price range

open87 06-25-2004 01:52 PM

Re: Cost to have a #6 drive repainted
 

Originally Posted by hugetime1
i'd say about 50 bucks, 1 gal of latex exterior black paint $40
1 roller $5
1 small brush $2.50
A few sheets of sand paper $2.50
people that get away with charging 2 grand to put some black paint on a drive.....PRICELESS


you get what you pay for :bunny: and 2 pancakes :D

xxxtreme171 06-25-2004 03:15 PM

Re: Cost to have a #6 drive repainted
 

Originally Posted by hugetime1
i'd say about 50 bucks, 1 gal of latex exterior black paint $40
1 roller $5
1 small brush $2.50
A few sheets of sand paper $2.50
people that get away with charging 2 grand to put some black paint on a drive.....PRICELESS

LMAO........ :D :D :D


All times are GMT -5. The time now is 04:30 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.