oildyne pumps
#1
Registered
Thread Starter
oildyne pumps
I have a good friend who works at parker (oildyne). He needs to know the P/n for the pumps used. I belive that it is 108ams10-clb-2v-2912.
AM 12vdc series wound
s standard pump (not cold)
10 0.0098 CIPR
C 46 cu in resevoir
LB reversible locking with back pressure
2 7/16-24 inverse flare
V Vertical Mount
29 2900 "up" setting
12 1200 "Down" setting
Anyone know for sure
AM 12vdc series wound
s standard pump (not cold)
10 0.0098 CIPR
C 46 cu in resevoir
LB reversible locking with back pressure
2 7/16-24 inverse flare
V Vertical Mount
29 2900 "up" setting
12 1200 "Down" setting
Anyone know for sure
#2
Registered
Join Date: Jun 2006
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: oildyne pumps
I am going to follow this one up with a question. I have an oildyne/prestolite hydraulic pump in a 79 merc. The out drive slowly falls back down to the down position after being raised. I know this is in internal seal problem... but which one!? This has got me stumped. I tried tightening the springs to all of the internal valves with no success. Any thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
ratman
General Boating Discussion
10
04-16-2006 11:32 AM