Who has info and pics on Sea Ray's Pachanga??
 

Mainly 30' and up. My Dad saw one the other day and liked it a lot. (He has a Sea Ray Crusier) He sounds like he may have an itch for a go-fast. :D

Re: Who has info and pics on Sea Ray's Pachanga??
 

Have seen many for sale, mainly 22's with 350's and 454's. They built a 19', 22' ,27' and 32's from around 1986 to 1990 or 1991. Don't know a whole lot about them other than they were loaded with many extra's, and the gel color combos were nice looking. It was a compromise for a need for "speed" that wanted the family amenities. With any used boat you are going to look at, transom, bulkheads, stringers, fuel tank condition is primary concern. Items like seats, engines, drives are costly as well, but are a lot easier to replace.

Good Luck

E.S.

Here is a 32 with omc drives and 454's in Miami and is listed for $14,500 as a "project boat."

Re: Who has info and pics on Sea Ray's Pachanga??
 

http://cgi.ebay.com/ebaymotors/ws/eB...489646409&rd=1

heres one on ebay

Re: Who has info and pics on Sea Ray's Pachanga??
 

Send OSO member GForce a message... I believe he has 2 of the 32's at the moment. Was on one of them at LOTO during the shootout a few weeks back. Lot's of room in them.

Re: Who has info and pics on Sea Ray's Pachanga??
 

Here is G-Forces boat.

Re: Who has info and pics on Sea Ray's Pachanga??
 

Or he could just buy an Envision... everyone knows that Envisions are the old Sea Ray hulls, right Frequency???? :D

Re: Who has info and pics on Sea Ray's Pachanga??
 

customer of mine has a 32 which we recently painted, installed new upholstery, and repowered with new 315 yanmars. also installed new gimbals, drives etc.. he cruises it at 55 mph and burns only 8-9 gals an hour total..pretty impressive considering it comes with a 5 year 2,000 hour warranty . he is thinking of selling it to build a 40' skater with diesels..

Re: Who has info and pics on Sea Ray's Pachanga??
 

G-Force has some horsepower under the hatches. I believe it runs around 76 and still needs to be dialed in !!!!!