Looking for Mooring cover with draw cord or elastic edge………..
#1
Gold Member
Gold Member
Thread Starter
Join Date: Nov 2003
Location: Hampton N.H.
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Mooring cover with draw cord or elastic edge………..
I'm looking for a full mooring cover for my boat (25 Outlaw) to keep the sun from fading the deck. Any recommendations on brand/ best cost would be appreciated. I saw a nice cover on a 25 that had either a draw cord or elasticized edge that held the cover tight to the hull just under the rub rail (no strap loops).
#3
OSO Moderator
Charter Member
Re: Looking for Mooring cover with draw cord or elastic edge………..
carriecovers.com
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
#4
Re: Looking for Mooring cover with draw cord or elastic edge………..
coverquest.com custom 25 outlaw and semi custom shark-skin covers for approx 300 - 325 right here.
http://www.coverquest.com/covers/boat/boatdetail.php
P.S. shark-skin is very light, very durable and very water-proof
http://www.coverquest.com/covers/boat/boatdetail.php
P.S. shark-skin is very light, very durable and very water-proof
Last edited by Chris288; 09-15-2004 at 02:25 PM.
#5
Re: Looking for Mooring cover with draw cord or elastic edge………..
I bought the blue cover from Boater's World for my 26' Sonic, and was quite happy with it. Elastic surround was a pain to get used to, but fit and finish was pretty decent, and the built in straps to keep it down to a the trailer or lift were nice.
#6
Toxic FORMULA
Platinum Member
Re: Looking for Mooring cover with draw cord or elastic edge………..
Originally Posted by Chris288
coverquest.com custom 25 outlaw and semi custom shark-skin covers for approx 300 - 325 right here.
http://www.coverquest.com/covers/boat/boatdetail.php
P.S. shark-skin is very light, very durable and very water-proof
http://www.coverquest.com/covers/boat/boatdetail.php
P.S. shark-skin is very light, very durable and very water-proof
#7
Gold Member
Gold Member
Thread Starter
Join Date: Nov 2003
Location: Hampton N.H.
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Mooring cover with draw cord or elastic edge………..
Originally Posted by Chris288
P.S. shark-skin is very light, very durable and very water-proof
#8
Registered
Re: Looking for Mooring cover with draw cord or elastic edge………..
I saw the Carrie add in Oct. powerboat mag. page 37. They say a 35' cover weighs less than a pair of jeans, and folds up into a pretty small bag. I thought they were pricy, for our size boat (43') they are $900-$1,200 but I have not compared prices.
#9
www.sunriseuph.com
Platinum Member
Join Date: Mar 2004
Location: Lake of the Ozarks, MO 38 MM
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Mooring cover with draw cord or elastic edge………..
Just my .02 worth, elastic is fine when cover is new, but seems to be the first part of the cover to go bad. I prefer the draw cord in the bottom edge for that reason. And altho if enough overhang below the rub rail the cover should stay in place except for higher wind conditions at which time you will need the tie downs on the sides as well. Good luck.
John
www.sunriseuph.com
John
www.sunriseuph.com
#10
Registered
Join Date: Apr 2001
Location: Cave Creek, AZ
Posts: 923
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Mooring cover with draw cord or elastic edge………..
I bought a tyvek cover from Overton's for my last boat to use as a light cover to keep my real cover looking new. IT was pretty cheap, arouns $200 I think, and it worked well, although after 2 years it was fairly trashed. I wouldn't use that as the only cover, but for a lightweight cover it was great