Re: 750 sterling vs 750 Zuls............Again!
 

No just yours! :p

Re: 750 sterling vs 750 Zuls............Again!
 

A year ago I broke a blower motor; which was put together by a builder in Penn. I contacted Richie Zul and discussed my motor. He had me bring it down and he built me a new motor. I am a little guy and he went out of his way to give me the best product that he could for my budget. After I got the motor; he has called to see how it is running. Any time I have had a question he has been more than helpful. His service has been outstanding.
We are very happy with his work and would recommend him.
Tom

Re: 750 sterling vs 750 Zuls............Again!
 

interesting ...

http://www.boatingtodaytv.com/

click on video

Re: 750 sterling vs 750 Zuls............Again!
 

Awesome videos! Really enjoyed the seeing the Torque V-12 being tested at Sterling. Latest Powerboat said Sterling and Dave Callan were planning to reintroduce it. As some of you know, Dave replaced the turbines with the Torque V-12's

Re: 750 sterling vs 750 Zuls............Again!
 

Shouldn't really matter which builder you go with as this is a very simple combination to build. I would suggest going with carbs. this will save you $$$. I built a pair of 598 cu, 740hp motors about 6 yrs ago with a local builder and some combination help(cams & heads) from Pfaff. They started and idled ,800rpm, like an efi and never died during shofting or long idles.
However, I think you should give Louis Boyd a try. He is in Okc, Very Knowledgeable, and builds Big Thunders Championship winning motors. I have a set of his 1050,s that I am extremely Happy with.He builds alot of boat motors and is a carb genus

Re: 750 sterling vs 750 Zuls............Again!
 

Here www.zulracing.com/engines.htm

TYPE III
750 hp+ @ 6000 rpm
598 cubic inch displacement
Dart Pro 1 Ported Heads
Dart Single Plain Manifold
9.5 to 1 compression ratio
91+ octane fuel requirement
Roller Lifter Camshaft
1090 4-barrel carb


Rick OSG

Re: 750 sterling vs 750 Zuls............Again!
 

I like the looks of that Rick....:D:D

42 MTI,
Your boat is the Circum Scism boat right??....

Re: 750 sterling vs 750 Zuls............Again!
 

Maverick,
Yea thats me. Have we meet before

Re: 750 sterling vs 750 Zuls............Again!
 

Never met but i have seen you several times. I came to last years run at grand lake and also went to the Smoke on the Water run this year. I have also seen you at Texoma several times. I have the 38 lightning w/ the tear away flag graphics.