#5 Drive Steering Assembly needed!
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: Guam, USA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
#5 Drive Steering Assembly needed!
I am looking for a complete “NEW” Power steering cylinder Assembly for my 1992 #5 Drive! It connects to two external May Fair cylinders. My cylinders are fine! Just need the complete Assembly on the inside of the transom!
Take a look at the Picture below.
Thanks for the help!
Bryan
http://www.offshoreonly.com/forums/a...id=97871&stc=1
Take a look at the Picture below.
Thanks for the help!
Bryan
http://www.offshoreonly.com/forums/a...id=97871&stc=1
#2
Charter Member #232
Charter Member
Re: #5 Drive Steering Assembly needed!
Looks like the same valve on a TRS set up? They are cheap, about 200-250 new. Is it leaking? If I was you I would just change over to full hydrolic and be done with it.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#3
Charter Member
Charter Member
Join Date: Feb 2001
Location: Gretna, Ne
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Re: #5 Drive Steering Assembly needed!
Why don't you go to an all hydraulic helm set up? Then would would not need the internal ram and you can get rid of your steering cable. Sounds like you already have the rams and wing plate for the drive. You really just need a helm unit and fome high pressure hose.
#4
Gold Member
Gold Member
Re: #5 Drive Steering Assembly needed!
If it is the hard to find Mercruiser Part # 71331A3, which Mercruiser currently sells for over $700.00, I have one. Of course, you will not pay near that price though. It is brand new, in the box. It is also used on the #3 Drive systems. Let me know. Thanks, Ed
#5
Registered
Thread Starter
Join Date: Jul 2004
Location: Guam, USA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Re: #5 Drive Steering Assembly needed!
Thanks for the replies! I think I am going to take the full Hydraulic system! I hate that stupid cable! I just was not aware of the Hydraulic steering! Thanks again
Bryan
Bryan
#6
Registered
Join Date: Nov 2000
Location: Overland Park, KS
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Re: #5 Drive Steering Assembly needed!
I have the exact same system (cable over hydraulic) for SSM 3's. What would be required to convert to full hydraulic? Parts, approx. pricing, etc.
Thanks,
Doug
Thanks,
Doug
#7
Gold Member
Gold Member
Re: #5 Drive Steering Assembly needed!
If either of you two gentlemen find that the steering cylinder I have, mentioned above, fits your needs...I will sell it for $290.00 firm, plus shipping. Let me know. Thanks, Ed
#8
Registered
Thread Starter
Join Date: Jul 2004
Location: Guam, USA
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Re: #5 Drive Steering Assembly needed!
Thanks Ed, I decided to go full hydraulic steering! IMCO $920.00 I also replace my 10 Year old but still working GT Cordless Trim Steering wheel! FYI Gary Teague was a Very big Help at GT Marine!
Thanks for all your Help!
Bryan
Thanks for all your Help!
Bryan