OT-AutoCad favor needed
#1
Official OSO boat whore
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
OT-AutoCad favor needed
I'm hoping there is a fellow member with autocad that could do me a favor. I have a very small drawing file that is in version 2004. I only have v14 at home. Is there a member out there that could back save this file for me? The file has several small blocks in it that may be 3d. These would also need to be back saved so they would be compatable. I'm not sure if the e-transmit will do this automatically. It proably does. Please send me your e-mail addy to [email protected]
BTW-are there any members out there that have upgraded to a newer version of auotcad and are looking to sell their past version? 2000i or even 2004 would be grand. The books are not necessary, but no student versions please.
BTW-are there any members out there that have upgraded to a newer version of auotcad and are looking to sell their past version? 2000i or even 2004 would be grand. The books are not necessary, but no student versions please.
#3
Registered
Join Date: Oct 2000
Location: Wilmington,De,USA
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
Re: OT-AutoCad favor needed
I feel your pain, Cord. I run into this dilemma myself quite frequently. I only have R-14 myself. Some of the "educated" engineers I have to deal with can't figure how to use the "save as" box and switch it to R-14 version. With my other 3D software, I save stuff for people like you as a *.dxf file so you can open in any version of AutoCad.
#4
Registered
Join Date: Dec 2000
Location: Ormond Beach, FL
Posts: 1,393
Likes: 0
Received 0 Likes
on
0 Posts
Re: OT-AutoCad favor needed
I have AutoCAD 2004 and I can convert it. If you haven't got it taken care email it to me at: [email protected]
Ben
Ben
#5
Registered
Re: OT-AutoCad favor needed
pick at vrsion 14 2000 2004 email to [email protected] and I'll send it back in any format.
#7
Official OSO boat whore
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Re: OT-AutoCad favor needed
DJ-that would be grand. My e-mail addy is above or you can give me a jingle if you want. 262-243-9663
Thanks for the help guys! I knew that the board would come through for me!
Thanks for the help guys! I knew that the board would come through for me!
#8
Platinum Member
Platinum Member
Re: OT-AutoCad favor needed
I've got every version up thru 2004, but my guys keep the R14 chugging along for the most part. We only use the newer versions for back converting like you are talking about.
3D, we do in other stuff and IGES back into Mechanical Desktop.
Good old R14 is a good package.
3D, we do in other stuff and IGES back into Mechanical Desktop.
Good old R14 is a good package.
Thread
Thread Starter
Forum
Replies
Last Post
FunHome
General Boating Discussion
14
05-02-2002 03:09 PM