livorsi/gaffrig gauges
 

Last year I bought a complete new set of Livorsi gauges (when they were
still calling them Gaffrig) for my 32 Fountain. I have to say,I'm not real
impressed with them. To start with, for some odd reason,both my tachs
glass dulled out,is rough to the touch and is all checked looking,but only
on my tachs,all other gauges are fine. Then the water pressure gauges
face, kind of floated up in the gauge,so there is a large gap visible when
looking at the gauges. I called them,the said I must of over tightened
the fitting. ( I didn't).I went for a ride on a new executioner & they were
the same way. Also both my oil temp gauges are fogged up! I thought
they were supposed to be the best!

Re: livorsi/gaffrig gauges
 

Re: livorsi/gaffrig gauges
 

epeek,
I'd call Gaffrig and speak with Mike Livorsi. I'm sure he will work something out for you. They have great customer service.
Dan

Re: livorsi/gaffrig gauges
 

Fred..
Like the logo on your avitar...
Bob :drink:

Re: livorsi/gaffrig gauges
 

Call Ed At Livorsi Marine 847-548-5900 Ext 217. He Would Be Glad To Take Care Of It. Windex Is Only CLEANING LIQUID To Be Used For Cleaning Gauges.

Re: livorsi/gaffrig gauges
 

Is there any way to artifically log hours onto a Gaffrig Precision (Livorsi) tach/hour meter?

I lost tach/hour meter function due to a bad connection in my engine harness. This has been identified and repaired, and I need to bring up the engine hours to match the other hour meter.

Can I do this with a spare battery and jumper wires, or do I need to send it in?

Re: livorsi/gaffrig gauges
 

You can equal them out with a 9 volt battery.