livorsi/gaffrig gauges
10-12-2004, 09:09 PM
#1
Registered
Thread Starter
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
livorsi/gaffrig gauges
Last year I bought a complete new set of Livorsi gauges (when they were
still calling them Gaffrig) for my 32 Fountain. I have to say,I'm not real
impressed with them. To start with, for some odd reason,both my tachs
glass dulled out,is rough to the touch and is all checked looking,but only
on my tachs,all other gauges are fine. Then the water pressure gauges
face, kind of floated up in the gauge,so there is a large gap visible when
looking at the gauges. I called them,the said I must of over tightened
the fitting. ( I didn't).I went for a ride on a new executioner & they were
the same way. Also both my oil temp gauges are fogged up! I thought
they were supposed to be the best!
still calling them Gaffrig) for my 32 Fountain. I have to say,I'm not real
impressed with them. To start with, for some odd reason,both my tachs
glass dulled out,is rough to the touch and is all checked looking,but only
on my tachs,all other gauges are fine. Then the water pressure gauges
face, kind of floated up in the gauge,so there is a large gap visible when
looking at the gauges. I called them,the said I must of over tightened
the fitting. ( I didn't).I went for a ride on a new executioner & they were
the same way. Also both my oil temp gauges are fogged up! I thought
they were supposed to be the best!
10-12-2004, 09:17 PM
#2
Registered
Join Date: Oct 2000
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Re: livorsi/gaffrig gauges
I haven't had any trouble with mine, July '01 is when we put them in the boat, and they have held up well, except the speedo is a "little" generous. Sorry for your trouble.
Robert
Robert
10-13-2004, 07:10 AM
#5
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: livorsi/gaffrig gauges
Call Ed At Livorsi Marine 847-548-5900 Ext 217. He Would Be Glad To Take Care Of It. Windex Is Only CLEANING LIQUID To Be Used For Cleaning Gauges.
Last edited by GAUGE THIS; 10-13-2004 at 07:13 AM.
10-14-2004, 03:15 AM
#6
Registered
Join Date: Sep 2003
Location: Toledo, Ohio/Las Vegas, NV
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
Re: livorsi/gaffrig gauges
Is there any way to artifically log hours onto a Gaffrig Precision (Livorsi) tach/hour meter?
I lost tach/hour meter function due to a bad connection in my engine harness. This has been identified and repaired, and I need to bring up the engine hours to match the other hour meter.
Can I do this with a spare battery and jumper wires, or do I need to send it in?
I lost tach/hour meter function due to a bad connection in my engine harness. This has been identified and repaired, and I need to bring up the engine hours to match the other hour meter.
Can I do this with a spare battery and jumper wires, or do I need to send it in?
10-14-2004, 06:33 AM
#7
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Saratoga Springs, N.Y.
Posts: 2,910
Likes: 0
Received 0 Likes
on
0 Posts
Re: livorsi/gaffrig gauges
Originally Posted by RedDog382
Is there any way to artifically log hours onto a Gaffrig Precision (Livorsi) tach/hour meter?
I lost tach/hour meter function due to a bad connection in my engine harness. This has been identified and repaired, and I need to bring up the engine hours to match the other hour meter.
Can I do this with a spare battery and jumper wires, or do I need to send it in?
I lost tach/hour meter function due to a bad connection in my engine harness. This has been identified and repaired, and I need to bring up the engine hours to match the other hour meter.
Can I do this with a spare battery and jumper wires, or do I need to send it in?
Thread
Thread Starter
Forum
Replies
Last Post
26scarab
General Boating Discussion
13
01-06-2004 03:39 PM
RumRunner
General Q & A
2
06-01-2002 09:44 PM
