Notices

Powerquest info needed.

Thread Tools
 
Old 12-02-2004, 08:57 PM
  #1  
Registered
Thread Starter
 
270Laser's Avatar
 
Join Date: Oct 2004
Location: Cape Coral, Fl.
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Powerquest info needed.

I picked up a 99 Powerquest 270 Laser a few months ago. So far it's been a great boat. Anyone else have one or have any experience / knowledge about these boats.(specs,factory info,etx.) Thanks in advance!
270Laser is offline  
Old 12-02-2004, 09:08 PM
  #2  
Registered
Thread Starter
 
270Laser's Avatar
 
Join Date: Oct 2004
Location: Cape Coral, Fl.
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Powerquest info needed.

pic.
Attached Thumbnails Powerquest info needed.-dsc01255.jpg  
270Laser is offline  
Old 12-02-2004, 09:53 PM
  #3  
Registered
 
Mentalpause's Avatar
 
Join Date: Nov 2000
Location: IL...XLOTO
Posts: 3,944
Received 90 Likes on 54 Posts
Default Re: Powerquest info needed.

Nice looking boat.

I had a 98 270 for two years. PQ makes a nice boat. It had a tendency to porpoise in rougher conditions. Needed to keep the drives tucked in and use some tabs to keep a flat profile. Mine had a 454 mag, 385 hp. I never tested with a GPS. The speedo showed low 60s but I think it was more like 57-59, but that is just a guess from running with others.

Keep wax on the gel, the graphic colors will fade if they get too much extended sun exposure.
Mentalpause is offline  
Old 12-02-2004, 10:44 PM
  #4  
Registered
Thread Starter
 
270Laser's Avatar
 
Join Date: Oct 2004
Location: Cape Coral, Fl.
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Powerquest info needed.

Mentalpause,
Thanks! Your right I've noticed it runs better with the drive down and some tap in the rough. It does 60mph on gps. My Speedo also runs higher, reads 65mph. It has a four plade on it now and I have the factory 3 blade. Not sure which is better? Do you still have the factory brochure. It would be awesome if some one could scan e-mail it to me.
270Laser is offline  
Old 12-03-2004, 06:05 AM
  #5  
Member #9
Charter Member
 
hp500efi's Avatar
 
Join Date: Oct 2000
Location: Pewaukee, WI
Posts: 4,273
Likes: 0
Received 4 Likes on 2 Posts
Default Re: Powerquest info needed.

Have a 280 Silencer which I really like. PQ boats have a ton of room, good reliable speeds and some good lines.

Your 270 looks sharp
__________________
Member of the Liquid Jungle
hp500efi is offline  
Old 12-03-2004, 05:31 PM
  #6  
Registered
Thread Starter
 
270Laser's Avatar
 
Join Date: Oct 2004
Location: Cape Coral, Fl.
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Powerquest info needed.

hp500efi
Thanks!
Do you have a 500hp in your laser?
What kind of mph are you running. Do you have any pics.? Thanks in advance.
270Laser is offline  
Old 12-03-2004, 06:07 PM
  #7  
Registered
 
Mentalpause's Avatar
 
Join Date: Nov 2000
Location: IL...XLOTO
Posts: 3,944
Received 90 Likes on 54 Posts
Default Re: Powerquest info needed.

I left everything with the boat when I sold it, so don't have any manuals.
Mentalpause is offline  
Old 12-04-2004, 07:08 AM
  #8  
Member #9
Charter Member
 
hp500efi's Avatar
 
Join Date: Oct 2000
Location: Pewaukee, WI
Posts: 4,273
Likes: 0
Received 4 Likes on 2 Posts
Default Re: Powerquest info needed.

Originally Posted by 270Laser
hp500efi
Thanks!
Do you have a 500hp in your laser?
What kind of mph are you running. Do you have any pics.? Thanks in advance.

I have the 280 Silencer which replaced the 270 with a stepped hull. Wish I had the 500 . Mine has the 502EFI and goes about 63-65 with entire family and gear. It's a 1999, bought it new and thinking about getting something a little different.
__________________
Member of the Liquid Jungle
hp500efi is offline  
Old 12-04-2004, 12:46 PM
  #9  
Registered
 
Mentalpause's Avatar
 
Join Date: Nov 2000
Location: IL...XLOTO
Posts: 3,944
Received 90 Likes on 54 Posts
Default Re: Powerquest info needed.

Originally Posted by hp500efi
I have the 280 Silencer which replaced the 270 with a stepped hull. Wish I had the 500 . Mine has the 502EFI and goes about 63-65 with entire family and gear. It's a 1999, bought it new and thinking about getting something a little different.
HP500 - what are you looking at to replace the Silencer?
Mentalpause is offline  
Old 12-04-2004, 08:23 PM
  #10  
Registered
Thread Starter
 
270Laser's Avatar
 
Join Date: Oct 2004
Location: Cape Coral, Fl.
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Powerquest info needed.

I somehow missed you saying you had a 280 Silencer. I looked at a couple of 280's before I bought my 270. Unfortunatly I didn't find one in the condition I wanted. They both were 1999's and pretty trashed.
270Laser is offline  


Quick Reply: Powerquest info needed.


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.