I like this, can someone loan me $30,000
#1
Registered
Thread Starter
I like this, can someone loan me $30,000
#4
Registered
VIP Member
Re: I like this, can someone loan me $30,000
I remember those boats from my Everglades Marina days as a Cigarette dealer. It is the old 36' cut down to 33'. It has a 9' 3" beam, not 8'. I think Craig Barrie told me they did 10 hulls so that they could race in some special class. There is one down here in Pompano Beach with a pair of 454s and TRS still running and looking good.
#6
Registered
Thread Starter
Re: I like this, can someone loan me $30,000
Thanks CAP, If we have enough pennies between the two of us I'l buy you a beer.
Or maybe we could put the extra penniies towards a racing rig
Or maybe we could put the extra penniies towards a racing rig
#7
Registered
Thread Starter
Re: I like this, can someone loan me $30,000
Cozzi, is it that wide??? 9'3" is a helluva a lot. I know the newer Donzi 33's are 9'2", thats alot of beam.
Doesn't look that wide from the pics.
Doesn't look that wide from the pics.
#8
Registered
VIP Member
Re: I like this, can someone loan me $30,000
Yes. The 35' Mistress sides came straight up from the middle of the side for an 8' beam. The 36' followed the flair without a bump in the side and the deck ended up either 9'3" or 9' 6".
The 33's were the 36' with a stopper in the mold. Notice in the photo of the transom the curve from side-to-side? That was the tip-off.
The 33's were the 36' with a stopper in the mold. Notice in the photo of the transom the curve from side-to-side? That was the tip-off.
#9
AT Cult Member #3
VIP Member
Re: I like this, can someone loan me $30,000
Bouy, I have the money but my interest rates will hurt Plus it will have to be kept in Maryland until you pay up so I can use it!! That is a sweet looking boat!! Love the dark hull sides