Imco 4x4's, any input?
12-18-2004, 10:23 AM
#3
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
Re: Imco 4x4's, any input?
Originally Posted by open wide
Does anyone have any experience or first hand knowledge of these drives? I was thinking this is the way to go for a bravo conversion.
12-18-2004, 10:24 AM
#4
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
Re: Imco 4x4's, any input?
Originally Posted by Too Old
Do a search on "IMCO" on the OSO forums and read it.
There's been a lot of first hand experience with IMCO reported on those threads. I think it'll give you some insight.
Actually, her's a link..............
http://www.offshoreonly.com/forums/s...highlight=IMCO
There's been a lot of first hand experience with IMCO reported on those threads. I think it'll give you some insight.
Actually, her's a link..............
http://www.offshoreonly.com/forums/s...highlight=IMCO
12-18-2004, 11:22 AM
#5
Registered
Join Date: Feb 2002
Location: KY
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
Re: Imco 4x4's, any input?
Originally Posted by Reed Jensen
Step up to the Arneson conversion..... by they time you go through two IMCO replacements in about 50 hours... you will wish you had.
Funny you should say that....exaclty what the Rockit man found out....except he went with a weisman
Last edited by jdnca1; 12-18-2004 at 11:25 AM.
12-18-2004, 12:05 PM
#7
Registered
Join Date: Dec 2003
Location: Los Angeles California
Posts: 8,306
Likes: 0
Received 2 Likes
on
2 Posts
Re: Imco 4x4's, any input?
Originally Posted by jdnca1
Funny you should say that....exaclty what the Rockit man found out....except he went with a weisman
12-19-2004, 07:51 PM
#8
Registered
Thread Starter
Join Date: Sep 2003
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: Imco 4x4's, any input?
Weisman is coming out with a direct bravo replacement in late January, according to Pat at weisman. It sounds like they have their stuff figured out. I may be waiting to see how they come out. It is supposed to be rated at 750 HP and shifts like a bravo. I am not real sure if I want to be a guinee pig, boating season is too short. My choices are max machine, speedmasters V or IIIa, arnesons, or weismans. Anybody out there with any good info on any of them is appreciated.
12-19-2004, 07:56 PM
#10
Registered
Thread Starter
Join Date: Sep 2003
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: Imco 4x4's, any input?
Sounds like Imco is going downhill. With how big Imco is, you would think that there customer service would be top notch. After reading that thread I crossed off the 4x4 drives from my list. OSO kicks butt!
