the new BAD BOY 38 canopy !!!
#11
Registered User
Join Date: Sep 2002
Location: hammonton N.J.
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
Re: the new BAD BOY 38 canopy !!!
Rose bud is that carbin fiber or sglass combo.Is it vaccummed bagged .What are the stringers made of. Post some pic of the build process
Last edited by p.apache; 01-04-2005 at 11:59 PM.
#12
Guest
Posts: n/a
Re: the new BAD BOY 38 canopy !!!
When I was at the SBI race in NOLA a few years back...the first boat was there and it was awesome !! and those guys worked their tail off on that weekend dialing it in. Nice to see a company building boats like these...
Now..about that name..I know,something with an Indian sound to it
Now..about that name..I know,something with an Indian sound to it
#13
Registered User
VIP Member
Join Date: Apr 2003
Location: Brick NJ
Posts: 3,264
Likes: 0
Received 0 Likes
on
0 Posts
Re: the new BAD BOY 38 canopy !!!
I ran against that boat all season, no one has had a better view of that boat running than me." Rock solid." should be the name of the first one. Good luck Tony.
#16
Registered
Thread Starter
Re: the new BAD BOY 38 canopy !!!
[/SIZE]We are all very excited!
P apache, the canopy-kinda sorta but not really. Its Tonys own design. If you look, you will notice the rear sides are different, I thought the same thing as well. The boats are built with Kevlar, E glass, carbon capped stringers 100% vynalester hand laid, all cored and vacuum bagged. After extensive research Tony told me that the grid structure used only in the engine compartment is made of wood and glass. He found that the wood had better strength then any core stringers available; The wood w/ glass has better strength when a hole would be drilled for motor mounts or rigging, the holes will not widen or get larger over time. The 1st 38 that ran all the races has no cracks, and I have looked, all over and I can't find them ESP after just racing. I hope the Bad Boy Boats will be racing all over!
Bob, Hi! Shhh we're supposed to keep that Aronow stuff under wraps! But yes, we are mixing up many things for the OSO community! I have a few custom gas r/c boats we are rigging, they are fun.
Best to all
Christian
P apache, the canopy-kinda sorta but not really. Its Tonys own design. If you look, you will notice the rear sides are different, I thought the same thing as well. The boats are built with Kevlar, E glass, carbon capped stringers 100% vynalester hand laid, all cored and vacuum bagged. After extensive research Tony told me that the grid structure used only in the engine compartment is made of wood and glass. He found that the wood had better strength then any core stringers available; The wood w/ glass has better strength when a hole would be drilled for motor mounts or rigging, the holes will not widen or get larger over time. The 1st 38 that ran all the races has no cracks, and I have looked, all over and I can't find them ESP after just racing. I hope the Bad Boy Boats will be racing all over!
Bob, Hi! Shhh we're supposed to keep that Aronow stuff under wraps! But yes, we are mixing up many things for the OSO community! I have a few custom gas r/c boats we are rigging, they are fun.
Best to all
Christian
#18
Platinum Member
Platinum Member
Re: the new BAD BOY 38 canopy !!!
That hull looks a lot like the 39' Kryptonite hull. The Kryptonite absolutely hauls a** so I have no doubt that this new Bad Boy will do the same! The top picture here is the Bad Boy and the bottom two are the Kryptonite.
Last edited by Hot Duck; 01-05-2005 at 10:53 PM.