Calling all Players and Pimps!
01-12-2005, 06:28 PM
#11
Platinum Member
Platinum Member
Re: Calling all Players and Pimps!
Originally Posted by rainmn
You want to make one for pimps, you need to make a 6.5 round cover with a spinner. 
If not a spinner, just copy some ghetto wheel.
As for the Laveycraft designs, I like B.
If not a spinner, just copy some ghetto wheel.As for the Laveycraft designs, I like B.
You know he is right. Make 1 with a spinner style cover that actually spins
01-13-2005, 12:29 AM
#12
VIP Member
Re: Calling all Players and Pimps!
Yep, I'd buy 8, maybe 10; 6.5 spinners at the right price. Gotsta be a quality piece though; and they can't be dangerous. I would also want to take them apart if need be. Can you have a prototype ready for the Miami Boat Show? They would also have to fit over these speakers without their white plastic grill:
http://www.mbquart.com/2003/en_US/pr...&model=NKD+116
They have an integrated tweeter that is mounted on a bridge from the side, NOT through the center of the cone/voicecoil, they portrudes out of the front face of the main cone at 10*.
http://www.mbquart.com/2003/en_US/pr...&model=NKD+116
They have an integrated tweeter that is mounted on a bridge from the side, NOT through the center of the cone/voicecoil, they portrudes out of the front face of the main cone at 10*.
Last edited by Sydwayz; 01-13-2005 at 12:37 AM.
02-24-2005, 10:01 AM
#13
Registered
Thread Starter
Join Date: Jun 2003
Location: Newport Beach / California
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Re: Calling all Players and Pimps!
Originally Posted by 27Fountain
As for the Lavey crat "A" is the coolest. Please post more designs also can you anodize the grills?? If so what colors??
thanks
WILL
thanks
WILL
We usually powdercoat the grills to match the popular marine hardware being sold today. Annodizing is a thing of the past, if fades in sunlight so most mfg's are powdercoating their hardware.
If you stuff looks like a candy color then it is powdercoated. The candy look comes from the aluminum being polished then coated with a candy red, blue, purple etc..
Check out the website
http://www.xaudiocovers.com
Jeff
02-24-2005, 10:10 AM
#14
Registered
Thread Starter
Join Date: Jun 2003
Location: Newport Beach / California
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Re: Calling all Players and Pimps!
Originally Posted by Sydwayz
Yep, I'd buy 8, maybe 10; 6.5 spinners at the right price. Gotsta be a quality piece though; and they can't be dangerous. I would also want to take them apart if need be. Can you have a prototype ready for the Miami Boat Show? They would also have to fit over these speakers without their white plastic grill:
http://www.mbquart.com/2003/en_US/pr...&model=NKD+116
They have an integrated tweeter that is mounted on a bridge from the side, NOT through the center of the cone/voicecoil, they portrudes out of the front face of the main cone at 10*.
http://www.mbquart.com/2003/en_US/pr...&model=NKD+116
They have an integrated tweeter that is mounted on a bridge from the side, NOT through the center of the cone/voicecoil, they portrudes out of the front face of the main cone at 10*.
Sorry, for the late reply. I have had so many requests for spinners, however, in a boat they are too dangerous. All that spining on a smooth bering. I have this cover that will slip over your MB's not a problem. Any design can be adapted.
How was Miami ?
