38' CAT up in smoke
Re: 38' CAT up in smoke
01-22-2005, 10:46 AM
#12
Registered
Re: 38' CAT up in smoke
Sorry for your loss ..that realy blows , glad noone was hurt 
Didnt realize MEPK reaction could ignite something
On a lighter note , I think that will buff out
sorry couldnt help it
Didnt realize MEPK reaction could ignite something
On a lighter note , I think that will buff out
sorry couldnt help it
Racer
01-22-2005, 02:26 PM
#17
Registered
Join Date: Feb 2001
Location: washington NC, USA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Re: 38' CAT up in smoke
Doug,
Hey Man Sorry to hear about your shop and your 38' damn thing was lookin good too. Just Glad you & your guys are ok. Hopefully the shop faired well. Anything we can do let us know.
Ken Adams Jr. & Sr.
Hey Man Sorry to hear about your shop and your 38' damn thing was lookin good too. Just Glad you & your guys are ok. Hopefully the shop faired well. Anything we can do let us know.
Ken Adams Jr. & Sr.
01-22-2005, 07:06 PM
#18
Registered
Join Date: Oct 2003
Location: sarasota,fl
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
Re: 38' CAT up in smoke
Originally Posted by Speed2Lead
That wasn't the boat Dan and Mark were going to race was it?
my boat is ok and almost ready for the base coat of white paint.
frank you will get a ride!
01-23-2005, 12:30 AM
#19
Gold Member
Gold Member
Re: 38' CAT up in smoke
Glad to here no one was hurt. I understand how you feel, my Coyote which was the old Putt Putt race boat from the early eighties burned 2 years ago.
Last edited by Offshoreracr; 01-23-2005 at 12:32 AM.
01-23-2005, 07:55 AM
#20
Registered
Thread Starter
Join Date: Dec 2004
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: 38' CAT up in smoke
Amazingly enough Dale convinced me to look closely at the mold before I **** canned it. He was right only the outside skin was damage. It appears that the mold might still be salvageable. The fire was put out so quickly that the heat might not have penetrated below the SprayCore we use as a print barrier. We'll know more about it within the next week after we replace the outer layers & attach the steel bracing so we can pull it off the plug.
