Anyone familiar with this site?
 

Looks pretty cool. I know nothing about what it takes to create a part, but if you have an idea for something, looks like a good way to find out.

http://www.emachineshop.com/

Re: Anyone familiar with this site?
 

thanks for the site :eureka: :eureka:

Re: Anyone familiar with this site?
 

Great, thanks! You still buried in the bilge, painting, or are you going to be at the NJPPC party in Atlantic City and FPC in Miami?

Re: Anyone familiar with this site?
 

CBR, too dam cold to work on the boat. I've discovered the foam around the fuel tanks is wet. I took out as much as I could and need to heat the hull to dry it out. I've made alot of progress but still have a way to go.

Re: Anyone familiar with this site?
 

My foam around the fuel tanks was also wet, but also brown in colour and hard as a rock! I had it all ripped out, then after the new fuel tanks went in (twice now) new expanding foam was put in.

Good luck, that is a nasty job getting the bilge cleaned up. You have a sick fast boat, hope it will be ready for you this summer.

I'll buy you a beer if I see you in AC or Miami.