Any Machine Shop Tool Dealers here?
 

I am starting to put the Hustler blower motors together. I need a dial bore gage to check bearing clearance and bores .

I am looking at the Mitutoyo 511-166 which is a 2.0-6.0 with the .0001 gage face .
Is there and OSO members that sell them or recommend some where to get a deal on them?

Any suggestions :D

Thanks
Rob


Here is one link I found
http://www.penntoolco.com/catalog/pr...ategoryID=3950

Re: Any Machine Shop Tool Dealers here?
 

I think Dock Holiday can get a good deal on Starret stuff?

Re: Any Machine Shop Tool Dealers here?
 

STRIP
i JUST ORDERED ONE FOR ALBERT MYPANTERA28 FROM ENCO AND IT WAS VERY WELL PRICED 1-800-USE-ENCO TRY THEM YOU'LL GET THE BEST PRICE. ALSO I THINK ONE OF THE GUYS IN THE FORUM SOMEONE TOLD ME AT THE SHOW SELLS TOOLS ONLY BUT I DON'T KNOW EXACTLY WHO.

Re: Any Machine Shop Tool Dealers here?
 

I will try Dock Monday . He was at the show this weekend :D

Laz hows the show going for ya ?
I looked on Enco's site and there's was 241.99.I guess this is the best one to use?

http://www.use-enco.com/CGI/INSRIT?P...PARTPG=INLMK32

Re: Any Machine Shop Tool Dealers here?
 

I had used the cheapy $100 2-6" bore gauges before that can be had from ENCO. Surprised at how accurate it was, right down to the .0001 For a few time use, might consider this. Even the Starrets and B&S's are only as good as the setup.