Big thanks to Grafikworx and Lip Ship!!!!!
02-24-2005, 07:54 AM
#1
Big thanks to Grafikworx and Lip Ship!!!!!
I'd like to say a few words about two of the best folks in the performance boat world. Harold from Grafikworx and Phil from LipShip.
Three weeks ago, I hauled down a 30 Lip Ship edition TS Mystique that needed some attention. We looked at what needed to be done and finally decided that the boat should go back to Miami to its creators for the repairs.
I had emailed Grafikworx some pictures of what we wanted done and he gave me a rough estimate based on my pics. When I had arrived, Harold pointed out some other areas that should be taken care of including the engine hatch. It was obvious that Harold takes a lot of pride in his work and wanted to fix this thing the right way and suggested we call Phil at Lip Ship for the hatch repair.
Two weeks before the boat show is a busy time at Lip Ship but Phil squeezed us into his busy schedule and had Mauricio rebuild the hatch for us so the boat would be done in time to tow it home after the boat show.
When we arrived back to Miami I was amazed at the Grafikworx finished product.(and the short period of time that it took to complete) You could not tell where the work was done. Beautiful work guys! The boat looks like new!
In a business loaded with crooks, it's refreshing to do business with real genuine people like Harold and Phil. You guys are the best in your field!
Thanks,
Kurt
Three weeks ago, I hauled down a 30 Lip Ship edition TS Mystique that needed some attention. We looked at what needed to be done and finally decided that the boat should go back to Miami to its creators for the repairs.
I had emailed Grafikworx some pictures of what we wanted done and he gave me a rough estimate based on my pics. When I had arrived, Harold pointed out some other areas that should be taken care of including the engine hatch. It was obvious that Harold takes a lot of pride in his work and wanted to fix this thing the right way and suggested we call Phil at Lip Ship for the hatch repair.
Two weeks before the boat show is a busy time at Lip Ship but Phil squeezed us into his busy schedule and had Mauricio rebuild the hatch for us so the boat would be done in time to tow it home after the boat show.
When we arrived back to Miami I was amazed at the Grafikworx finished product.(and the short period of time that it took to complete) You could not tell where the work was done. Beautiful work guys! The boat looks like new!
In a business loaded with crooks, it's refreshing to do business with real genuine people like Harold and Phil. You guys are the best in your field!
Thanks,
Kurt
Last edited by Biggus; 02-24-2005 at 07:33 PM.
VIP Member
02-24-2005, 08:38 AM
#3
Re: Big thanks to Grafikworx and Lip Ship!!!!!
The motors are going together as we speak. They are 575SCI's with a roller cam upgrade. The cams are similar to the 500EFI cam. I could never understand why Merc installed a .559 lift/110lsa flat tappet cam on this motor.
Drives are Sportmasters/ITS
Drives are Sportmasters/ITS
02-24-2005, 08:49 AM
#5
Charter Member #232
Charter Member
Re: Big thanks to Grafikworx and Lip Ship!!!!!
Bout time you got me some pictures of that thing. Bet it does not look that good after the tow home in the snow 
__________________
Put your best foot forward!
Put your best foot forward!
02-24-2005, 08:58 AM
#6
Re: Big thanks to Grafikworx and Lip Ship!!!!!
Originally Posted by Audiofn
Bout time you got me some pictures of that thing. Bet it does not look that good after the tow home in the snow
02-24-2005, 08:59 AM
#7
Platinum Member
Platinum Member
Re: Big thanks to Grafikworx and Lip Ship!!!!!
Originally Posted by Biggus
The motors are going together as we speak. They are 575SCI's with a roller cam upgrade. The cams are similar to the 500EFI cam. I could never understand why Merc installed a .559 lift/110lsa flat tappet cam on this motor.
Drives are Sportmasters/ITS
Drives are Sportmasters/ITS
The usual results of dealing with two of the best, Harlod and Phil's.
Originally Posted by Biggus
...I could never understand why Merc installed a .559 lift/110lsa flat tappet cam on this motor....
02-24-2005, 10:58 AM
#9
Platinum Member
Platinum MemberJoin Date: Feb 2002
Location: Maine
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: Big thanks to Grafikworx and Lip Ship!!!!!
[QUOTE=Biggus]
wise azz ...
Hey Kurt, Is that a "new" Naples water toy for you?? Jeff
Originally Posted by GLH
Yahhh that kept me up many a nites also, that and how they put the peanuts inside those M&M's ... :drink: :drink:[/QUOTE
Yahhh that kept me up many a nites also, that and how they put the peanuts inside those M&M's ... :drink: :drink:[/QUOTE
wise azz ...
Jeff
