Offshoreonly.com
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   New JC Performance motor on dyno (https://www.offshoreonly.com/forums/general-boating-discussion/98021-new-jc-performance-motor-dyno.html)

NOBODY 03-10-2005 11:27 PM
Re: New JC Performance motor on dyno
 
JC's video-----------------Hell I'm still waiting on TMP's video.
It must take a lot of time to convert it.
I have a feeling they won't have that for a while, the sad part is they brought the video up...............................

JCPERF 03-11-2005 09:46 AM
Re: New JC Performance motor on dyno
 
Originally Posted by NOBODY
JC's video-----------------Hell I'm still waiting on TMP's video.
It must take a lot of time to convert it.
I have a feeling they won't have that for a while, the sad part is they brought the video up...............................
We are gonna video a dyno session when we get something good on the machine.

RumRunner 03-11-2005 09:59 AM
Re: New JC Performance motor on dyno
 
JC,

Was the oil temp correct?

JCPERF 03-11-2005 10:09 AM
Re: New JC Performance motor on dyno
 
Originally Posted by RumRunner
JC,

Was the oil temp correct?
No,not used.It doesnt have any effect on correction.We warm them up good though.

RumRunner 03-11-2005 10:32 AM
Re: New JC Performance motor on dyno
 
Correct, it won't affect the C.F., but it will affect the HP.

JCPERF 03-11-2005 10:37 AM
Re: New JC Performance motor on dyno
 
Originally Posted by RumRunner
Correct, it won't affect the C.F., but it will affect the HP.
No,The oil temp is over 200 when we pull the motor.We go over every part of the motor with a temp gun [radar].

masher44 03-11-2005 10:59 AM
Re: New JC Performance motor on dyno
 
Originally Posted by JCPERF
We are gonna video a dyno session when we get something good on the machine.

Like a 454? :evilb:

JCPERF 03-11-2005 11:06 AM
Re: New JC Performance motor on dyno
 
Originally Posted by masher44
Like a 454? :evilb:
wi :evilb: th whipples

vette131 03-11-2005 11:19 AM
Re: New JC Performance motor on dyno
 
Originally Posted by Stormrider
Dyno sheet for all the doubters...
is this motor going in a drag car?? if it's going in a boat i hope they have some small props to get to peak hp. aprox 970hp
at 5800 is not bad but 1050 at 5800 would be more usable in a boat.

JCPERF 03-11-2005 11:42 AM
Re: New JC Performance motor on dyno
 
Originally Posted by vette131
is this motor going in a drag car?? if it's going in a boat i hope they have some small props to get to peak hp. aprox 970hp
at 5800 is not bad but 1050 at 5800 would be more usable in a boat.
Yeah its going in a drag car with that oil pan and accessories on it.Should go 11s for sure :rolleyes:


All times are GMT -5. The time now is 07:14 PM.
Page 4 of 5
« First
2
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.