A Video of a 3.3 Whipple in Action
 

This is a little video clip of me Bench testing my Whipple 3.3 supercharger :drink:I figured yall would get a kick out of it. It doesn't take much to turn it over . I used a Dewalt battery operated drill . Click on the link ,It loads slow and play it on the 640 size.Pretty cool :drink:

I am just about ready to go to Precision Marine and Dyno them.

Rob :cool:




Slow motion
http://www.putfile.com/media.php?n=-022&width=640

Blowing your hair :D
http://www.putfile.com/media.php?n=-02524&width=640

Re: A Video of a 3.3 Whipple in Action
 

Very Cool looking. Those are going to be hot setups. How much boost are you going to run. When they come out with those for the ford Lightnings I am going to buy one. I love sending boost to motors.
Hunter

Re: A Video of a 3.3 Whipple in Action
 

Should be 6-7 . Where going to see how far on the Dyno.

Re: A Video of a 3.3 Whipple in Action
 

COOL :drink:

Re: A Video of a 3.3 Whipple in Action
 

Is that noise coming from the blower?

Re: A Video of a 3.3 Whipple in Action
 

cool :D

Re: A Video of a 3.3 Whipple in Action
 

strip when you going to the dyno .also 6or seven will be easy with the whipples looking forward to seeing you numbers

Re: A Video of a 3.3 Whipple in Action
 

I am hoping in 2 weeks. I am going to find out where a 741 quits :drink: Trying to do the fuel system and water system. I did not order the standard kit :eek:

Rob :drink:

Re: A Video of a 3.3 Whipple in Action
 

5800

Re: A Video of a 3.3 Whipple in Action
 

bet the motors are over 800

Re: A Video of a 3.3 Whipple in Action
 

Whats the Chevelle look like? Post a picture of it will ya?

Re: A Video of a 3.3 Whipple in Action
 

I wish. Mark wants to keep it around 750 for the outdrives.We are going to do some pully changes to see how high it will go though. :eek:


Chevelle :drink: What kind of pick you want?

Re: A Video of a 3.3 Whipple in Action
 

Mike Is that what yall have seen in a supercharger application??

Re: A Video of a 3.3 Whipple in Action
 

Rob, I'm now convinced you have wayyyy to much time on your hands...but in a good way. looks great!...Rob

Re: A Video of a 3.3 Whipple in Action
 

Just at night :drink:

Re: A Video of a 3.3 Whipple in Action
 

Here is another clip with some tunes . :drink:

It hard to believe that small hole made 9.05 pds of boost at 3500rpm :eek:


http://www.putfile.com/media.php?n=-022


http://www.putfile.com/media.php?n=-023&width=320

I saw the links were bad, heres a new one,

[YOUTUBE]http://www.youtube.com/watch?v=NQqq9343C-0[/YOUTUBE]






[youtube]http://www.youtube.com/watch?v=C4iDs7yzz_8[/youtube]

Check out this video on you tube of our boat with 525's and 3.3L whipples. The boat accelerates from 60mph-116mph in just a few seconds.

2008 Pirates Run - Team Taboo Ride for Charity
Team Taboo gives a ride to the winner of a raffle for the Juvenile Diabetes Research Foundation at the 2008 Pirates Run by the Seneca Powerboat ...
1 year ago 258 views Amppig32

you didn't post the link

Here when we go past the large boat we are at speed. http://www.youtube.com/watch?v=DNc7MgnMLqk

thats impressive speed.:drink:





[YOUTUBE]http://www.youtube.com/watch?v=DNc7MgnMLqk[/YOUTUBE]

These are stock Mercury 525's with the 3.3 whipple's making 888hp on race fuel. The boat will go much faster in our race setup, and we never turn the motors over 5600rpm.

More Power, More Power!
 

Nice setups . I understand the HP525's do very well with the Whipple 3.3's so you should have some nice engines when everything is right (ECM Programming) and Mark is great at that!
We are currently in the finishing stages and ready to dyno a Raylar prepared full Merc 496 with the 3.3 Whipple setup. We are shooting for a neat 800HP level on 91 pump gas and a modest boost. I'll post some pictures of this beauty tommorrow. Its going in a 30 foot party cat.
I think it looks better than even we expected and I think it will perform likewise.
I am not sure if Dustin has seen your post here but I don't think he would approve spinning those blowers dry like that, the Whipple screw rotors I have been told use the fuel coming in at the throttle body to lubricate as well as cool so I would cut that dry spinup to a minimum. Just a helpful suggestion. I know it sounds and looks cool but you don't want to possibly damage your beauties!

Best Regards,
Ray @ Raylar

Ray, I just checked the UPS tracking on the carbon fiber anti-freeze bottle. It is out for delivery to you now. Now lets see some pictures and dyno numbers on that motor.

did ya try with pump gas on the dyno for that set up? What boost was 888?

On pump gas we made about 750hp then we changed the pulleys for more power and we needed race fuel. We also had to change the maping because we where running the engine so hard all the time. Whipple's setup is a little fat and that works great for poker runs. Whipple's standard setup should work on your boat.

Cool.Im pushing mine a little much,but its running fine since I put them on in 2005.I need heads bad.
Rob:drink: