Carling Tech switches for Formula
#1
21 and 42 footers
Platinum Member
Thread Starter
Carling Tech switches for Formula
Does anyone have a source/ supply where these can be bought? I have tracked down the part number from Carling, but cannot order direct. These are the factory Formula bolster switches that control footrests and seat bottoms.
Part#- VLDAS002-8ZZ00-000
RedDog382 was kind enough to get the trim/ tab switches, but thesse come from a different source.
Russ C.
Part#- VLDAS002-8ZZ00-000
RedDog382 was kind enough to get the trim/ tab switches, but thesse come from a different source.
Russ C.
#2
Registered
Re: Carling Tech switches for Formula
you need new ones, or want white instead of black or what?
are the ones in the pic all "one piece" or the rocker switch pops into the bezel?
are the ones in the pic all "one piece" or the rocker switch pops into the bezel?
#3
21 and 42 footers
Platinum Member
Thread Starter
Re: Carling Tech switches for Formula
The rocker pops into the bezel and supposedly the part number is for both pieces. I have 2 like this and 2 black ones. apparently the original owner didn't care how they looked as long as they worked.
#4
Registered
Re: Carling Tech switches for Formula
they have now brought back the "flush" setup as of '04. I have the "stand above" the bezel rockers in my '02. At 6'5" I have caught my board shorts on the one leaving the drivers bolster a couple of times. I thought I'd like the snag free and cleaner look of the flush ones, although they are a little harder to "find" and use.
I have 4 of the '04 up style on my kitchen table right now. They've gone to a bezel milled out of starboard plastic that the rocker switch pops into for the same look as yours.
I'll sell you the 4 white surface mounts out of my low hour '02. Shoot me a PM if you want.
I have 4 of the '04 up style on my kitchen table right now. They've gone to a bezel milled out of starboard plastic that the rocker switch pops into for the same look as yours.
I'll sell you the 4 white surface mounts out of my low hour '02. Shoot me a PM if you want.
#5
British member!
VIP Member
Join Date: Dec 2002
Location: Salcombe, Devon, UK
Posts: 896
Likes: 0
Received 0 Likes
on
0 Posts
Re: Carling Tech switches for Formula
http://www.carlingtech.com/sales-locator/index.asp This page should give you the information you need!
Hope that helps!
Hope that helps!
__________________
Cookee
If it's too loud you're too old!
BananaShark Racing
British Champions 2005!
Cookee
If it's too loud you're too old!
BananaShark Racing
British Champions 2005!
#6
Registered
Re: Carling Tech switches for Formula
I can make the switch for you Russ. get me the switch and what I have done is take it apart and install a new back section onto your switch. I did this to one of mine when I could not find a white one.
#7
21 and 42 footers
Platinum Member
Thread Starter
Re: Carling Tech switches for Formula
Originally Posted by excursion
I can make the switch for you Russ. get me the switch and what I have done is take it apart and install a new back section onto your switch. I did this to one of mine when I could not find a white one.
My switches all work, but 2 are white like pictured, the other 2 are black and aren't even shaped like the white ones. I want to replace the 2 black ones to match the whites shown.
Thread
Thread Starter
Forum
Replies
Last Post
wannabe
Do It Yourself, Boating on a Budget
12
09-08-2008 01:09 AM