Wanted: any cheap or free :o) thru hull tips laying around?
 

I am doing an exhaust modification project on my silent thunder exhaust system. any cheap or free :o) thru hull tips laying around?

I don't care the condition. (flanges cracked, dents, doesn't matter) I just need 4" Dia stainless and don't want to by 10' section for the 4 x 4" long pieces i need for this project.
two thru hull tips will be enough material for my project.

I'll even pay shipping :evilb:

thanks

Ramb

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

What kind of tips are you looking for? I've got four with rubber flappers out of my Baja.

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

Rob call me I have a set we can deal on! :D 616-403-4482

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

burnzmazz,

I really only need the 4" diameter tubing. I will be cutting 4 pieces about 4" long with 22 deg angle on one end. this is for an exhaust routing that will be internal to my 88 formula silent thunder swim platform ( exaust flows inside the platform)

dyno.... I 'll call you too. thanks......

ramb

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

I've got 4 Rex tips w/ no-burn flaps inside. Switching to GGB's with the new dB laws and all. I'll cut you a great deal!

Fionn
510.541.8124
[email protected]

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

Rambunctious,

I have four, 4"x4" through hull (w/o flange) tips that you can have if you want them. Shipping only.

Bryan

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

Fionn,
I'm interested, I sent you email.
Thanks,
Dan

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

I have four of these too. 4". NEVER installed!

Will part for way less than cost. PM me if interested.

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

2112 im interested. your pm box is full

Re: Wanted: any cheap or free :o) thru hull tips laying around?
 

I e-mailed you.

I also have a set of 4 NEVER used through transom tips that are 4"diameter. These have internal fixed anti-reversion flappers.