|
Re: 350 mag timing tab...
I have been looking for an actual tab sticking out. I will have to use a mirrow and look. Mine are fairly close to the back seat, especially with the extra pulley and belt on the front.
Thanks a lot. I will check when I get home. |
Re: 350 mag timing tab...
Originally Posted by blowncrown
Mine is a 99 MPI and it has a tab at about 1 o'clock (looking aft) cast into the timing cover with a "V" groove cut into it. TDC and 8* are marked on the balancer. I loosen the distributor, instal my scantool, hook up the timing light, set timing to 8*. It's just like old school, exceped insted of disconecting the vacume advance you plug in a scantool. Not sure about your timing tab? I would be glad to sent a picture of mine. Good luck.
Awesome, send me a pic if you can. Thanks. |
Re: 350 mag timing tab...
3 Attachment(s)
Found it.... Wow is this going to be hard to check. Talk about having to stand on your head and use a mirror.
|
Re: 350 mag timing tab...
Good Now Paint That Bad Boy Yellow So You Can Find It Easier.
|
Re: 350 mag timing tab...
It is so tight I had to take the pic by just holding the camera down there.
|
Re: 350 mag timing tab...
Thats Worst Than Mine. Be Careful With Loose Clothing When You Time It Co You Don't Get Sucked Into The Engine When You Time It.
|
| All times are GMT -5. The time now is 11:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.