Offshoreonly.com - Procharger and plug gap?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Procharger and plug gap? (https://www.offshoreonly.com/forums/general-q/101180-procharger-plug-gap.html)

tssteph

04-20-2005 10:35 AM

Procharger and plug gap?

350 Mag MPI with stock ignition. Procharger manual says to run stock plug or one step colder. It does not mention the gap that should be used. Anyone have any thoughts? Experiences?

KCHOTBOAT

04-20-2005 10:38 AM

Re: Procharger and plug gap?

Quote:

Originally Posted by tssteph

350 Mag MPI with stock ignition. Procharger manual says to run stock plug or one step colder. It does not mention the gap that should be used. Anyone have any thoughts? Experiences?

I ran my ProCharger motor at the stock gap with stock plugs. You may try to contact bilge rat on here he owns a marina at LOTOI and has done lots of ProCharger motors.

Strip Poker 388

04-21-2005 01:35 AM

Re: Procharger and plug gap?

Quote:

Originally Posted by tssteph

350 Mag MPI with stock ignition. Procharger manual says to run stock plug or one step colder. It does not mention the gap that should be used. Anyone have any thoughts? Experiences?

.032

hillbilly24

04-21-2005 10:29 AM

Re: Procharger and plug gap?

Strip's right. you need to close the gap up a little or you will have misfire issues. I have founf 0.32-.034 to work the best depending on the plug.

All times are GMT -5. The time now is 05:05 AM.