Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   90 7.4L intake manifold (https://www.offshoreonly.com/forums/general-q/101488-90-7-4l-intake-manifold.html)

cloudmaster_321 04-24-2005 12:28 AM

90 7.4L intake manifold
 
my intake manifold is getting a couple of little rust spots, so i take it that it is cast iron, or steel. Does anyone know of an aluminum intake that would be a direct replacement for the most part that would work with my rochester carb?

RedDog382 04-24-2005 07:09 AM

Re: 90 7.4L intake manifold
 
You could just glass bead and repaint your intake. I have two intakes and carbs off '89 454 Magnums that are in liike new condition. I believe they are aluminum, but I would have to check. I would sell cheap. Let me know if you are interested in one of them.

cloudmaster_321 04-24-2005 02:47 PM

Re: 90 7.4L intake manifold
 
well, maybe, i was just trying to figure out if a company like edelbrock or something made a mild upgraded or stock replacement in aluminum. If i was to go through the trouble of pulling that intake off, i wouldn't want to put another steel one back on.

formula31 04-24-2005 06:08 PM

Re: 90 7.4L intake manifold
 
Ive got an Edelbrock performer that Im not using. rogue2800 (at) hotmail.com

cloudmaster_321 04-24-2005 06:54 PM

Re: 90 7.4L intake manifold
 
would something like that work with my original carb, i'm pretty sure i have a rochester..... how would a mild upgraded intake effect fuel/air mixture, would i have to play with the carb settings or would they be fine as is??

Pat McPherson 04-24-2005 07:19 PM

Re: 90 7.4L intake manifold
 
Edelbrock makes a Performer that takes the spread bore carb.
I ran one on my 1989 330HP/7.4.
A K&N filter is also a nice upgrade.
My engine gained about 100rpm on top with these two additions... :drink:

formula31 04-24-2005 07:24 PM

Re: 90 7.4L intake manifold
 
Yes, mine is for the Quad. spreadbore.

cloudmaster_321 04-24-2005 08:14 PM

Re: 90 7.4L intake manifold
 
how do i know if i have a "spread bore" I'm not sure what that means. I just know that i have a '90 7.4L merc, and i've been told that i have a rochester but i have never verified that

US1 Fountain 04-25-2005 12:02 AM

Re: 90 7.4L intake manifold
 
Might try to find a Merc aluminum intake with the brass lined water passages. Regular alum intakes will corrode at the gasket mating surfaces. Even in fresh water use.

WETTE VETTE 04-25-2005 06:40 AM

Re: 90 7.4L intake manifold
 
There aren't too many intakes that match up well to the peanut port heads. Be careful with your selection or you will go slower!


All times are GMT -5. The time now is 11:18 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.