Offshoreonly.com - SSM III Transom assemblies are interchangeable

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - SSM III Transom assemblies are interchangeable (https://www.offshoreonly.com/forums/general-q/102397-ssm-iii-transom-assemblies-interchangeable.html)

cigrocket

05-04-2005 01:35 PM

SSM III Transom assemblies are interchangeable

I heard that I can but a SSMIIIA into the SSMIII transom assembly. Am I able to put anyother SSM in that same #3 drive assembly or just IIIa's

Gary Anderson

05-04-2005 03:56 PM

Re: SSM III Transom assemblies are interchangeable

III and IIIas only differ by stronger bell housing, slightly heavier gimbal, and I think the hinge pins are larger. A III, IIIa or V should fit on the gimbal.
Gary

Bulldog

05-04-2005 11:58 PM

Re: SSM III Transom assemblies are interchangeable

The Hinge pins are bigger on a 3A bellhousing, and the ring is a little different. The drive mounting studs, lube port, etc. are the same.

cigrocket

05-05-2005 09:27 AM

Re: SSM III Transom assemblies are interchangeable

That makes a good deal on a boat with ssm3 sound better, at least if I have problems with it, I can upgrade without to much trouble.

All times are GMT -5. The time now is 03:37 AM.