1998 454 Mag Engine Scanning
Does any one know if a Mercruiser Scan tool can retrieve information from a 1998 Mercruiser 454 Mag ?
|
Re: 1998 454 Mag Engine Scanning
Not sure, but had someone hook a computer to the ecu's of my 98 502's last month and it only gave us a little info. Mainly just confirmed the hour meters were correct, but no running history on RPM's etc.
|
Re: 1998 454 Mag Engine Scanning
I've got 96 vintage MarinePower 454's with Arizon Speed EFI. The MEFI's are MEFI I. My RINDA Tester reads all the codes, diplays all the data and performs all the diagnostics.
|
Re: 1998 454 Mag Engine Scanning
The Merc scan tool will connect and read data from any Merc EFI engine made in '98. You can get an adapter to read operating hours on carbed Thunderbolt V systems as well.
As t500hps said, a MEFI 1 system will not give a break down of operating hours, just the total. Dave |
Re: 1998 454 Mag Engine Scanning
My RINDA gives total hours from MEFI 1--
|
Re: 1998 454 Mag Engine Scanning
I have a Rinda scan tool and have used it on my 2000 502's and have not been able to retrieve detailed operating hours for each RPM? It loes report all codes and other operating parameters.
|
Re: 1998 454 Mag Engine Scanning
I have the QuickSilver scanner, it will retrieve all the data you would need.
|
Re: 1998 454 Mag Engine Scanning
On a MEFI-3 do you obtain the breakdown of operating hours at each RPM range from the scanner via the MEFI-3, or must you connect it somehow to the ignition?
|
All times are GMT -5. The time now is 03:22 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.