Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Replacing K-plane indicator cable ? (https://www.offshoreonly.com/forums/general-q/102770-replacing-k-plane-indicator-cable.html)

HiPerf2000 05-09-2005 02:23 PM

Replacing K-plane indicator cable ?
 
I ordered the correct cable and it should be here on Wed. It is the longer cable (port side). It broke outside the boat at the tab.

Are there any tricks to installing this? What are the chances of being able to duct tape the ends together at the transom, and pulling the old one out from behind the dash...and having the new one rig itself into place???? :rolleyes:

Also, i thought i heard the conection to the indicator is spring loaded somehow ?

t500hps 05-09-2005 02:36 PM

Re: Replacing K-plane indicator cable ?
 

Originally Posted by HiPerf2000
I ordered the correct cable and it should be here on Wed. It is the longer cable (port side). It broke outside the boat at the tab.

Are there any tricks to installing this? What are the chances of being able to duct tape the ends together at the transom, and pulling the old one out from behind the dash...and having the new one rig itself into place???? :rolleyes:

Also, i thought i heard the conection to the indicator is spring loaded somehow ?

I have the exact same problem. My cable works, but isn't looking too good. Where/ how much was the cable? Mine is red and cracked at the transom. My Starboard engine is out right now so replacing it would be much easier in the next week or 2. Anybody know the answer to this????

HiPerf2000 05-09-2005 03:35 PM

Re: Replacing K-plane indicator cable ?
 
Your cable will have a number on it. something like this.....
032377-003-288 where the "288" is the length in INCHES. I ordered mine from here. Was the cheapest place i found it ($36.00 for a 24ft cable).

http://www.go2marine.com/g2m/action/...tegoryId/11570

CIG3 05-09-2005 03:54 PM

Re: Replacing K-plane indicator cable ?
 
for pull the new cable, you can use the tape method but sometimes it does not work. They make a coupling that connects the new and old cable to put it thru. Should be available at west marine

MrCIG 05-09-2005 07:00 PM

Re: Replacing K-plane indicator cable ?
 
Just did mine a couple weeks ago I duct taped them together and used some petrolium jelly and lubricated the out side to make it eaiser to slide by the rest of the cables in the tube.

Worked just fine

Mark

Cignificant 05-09-2005 08:07 PM

Re: Replacing K-plane indicator cable ?
 

Originally Posted by MrCIG
Just did mine a couple weeks ago I duct taped them together and used some petrolium jelly and lubricated the out side to make it eaiser to slide by the rest of the cables in the tube.

Worked just fine

Mark

Ditto, but I used good old grease. Russ, call Formula, they should be able to tell you the exact length.

cig1988 05-10-2005 03:52 AM

Re: Replacing K-plane indicator cable ?
 
When your into the indicator end up by the dash...do yourself a favor and lay a big towell under everything. They are spring loaded & can be a pain in the azz. You may want to order an extra couple of pointers & springs. Just in case.

HiPerf2000 05-10-2005 07:39 AM

Re: Replacing K-plane indicator cable ?
 
Thanks for the info guys.


All times are GMT -5. The time now is 11:35 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.