Offshoreonly.com - STARTER HELP, look at this!

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - STARTER HELP, look at this! (https://www.offshoreonly.com/forums/general-q/103340-starter-help-look.html)

hillbilly24

05-17-2005 10:45 PM

Re: STARTER HELP, look at this!

Quote:

Originally Posted by 1BIGJIM

I installed the starter today. No shims bolted right up, if I did not see it with my own eyes :rolleyes: I would not believe it.

To bad it sounds like a Honda starting, before the Big Block roars to life :D :D

Iv'e installed about 100 of those things at the shop, no problems and have never needed a shim for one. No need for the support bracket cuase they don't weigh 50 pounds anymore. They are also a hell of alot easier to install on twin applications on the port engine.

Prowler

05-17-2005 10:50 PM

Re: STARTER HELP, look at this!

the nice thing about the small is lighter weight,for starting the bolts in,most of the time it would be nice to have the smaller one,cause they ain't never out in the open,tight quarter's.

Airpacker

05-18-2005 07:41 AM

Re: STARTER HELP, look at this!

The small starter uses a planetary gear reduction transmission inside to increase torque output. The are plenty powerful little buggers. You willl find the same starter under your GM trucks.

The Menace

05-18-2005 07:51 AM

Re: STARTER HELP, look at this!

There is even a smaller one out on the market now. They were installing one on a Chevelle on HORSEPOWER TV last weekend.

All times are GMT -5. The time now is 12:54 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page