Offshoreonly.com - Help! Need Help!!

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Help! Need Help!! (https://www.offshoreonly.com/forums/general-q/104518-help-need-help.html)

JIMB	06-01-2005 08:51 AM

Help! Need Help!!

I'm not sure what this part is called so I will call it a coupler,or a fitting. I'ts the red fitting that is at the end of the throttle cable where it attaches to the carburetor mine broke in two ,and wont allow the engine to idle down below 1000 rpm.It looks like this piece just threads on the cable. dealer said it is no longer sold separate. I have a 1990 454 mag.I'm thinking someone out there may have one. PLEASE!!!

Gary Anderson

06-01-2005 10:30 AM

Re: Help! Need Help!!

You may not be able to get the exact one that was on there, but a replacement will fit.
Try Rex Marine or CP performance for a Heim joint, or a simple accelerator cable ball joint (quick release).
Gary

KNOT-RIGHT

06-01-2005 05:04 PM

Re: Help! Need Help!!

1 Attachment(s)

Mr Anderson, good Advice!
I got mine at CP Performance as well. I use the Ends that have a 10/32 thread size.

Like this

All times are GMT -5. The time now is 04:07 PM.