Offshoreonly.com - through hull holes for exhaust?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - through hull holes for exhaust? (https://www.offshoreonly.com/forums/general-q/106556-through-hull-holes-exhaust.html)

dyno	06-28-2005 09:14 PM

Re: through hull holes for exhaust?

I'm going to have to make 3/8" spacers to get the angle right to hit the hole center...... :mad:

mr_velocity

06-29-2005 09:05 AM

Re: through hull holes for exhaust?

Quote:

Originally Posted by RLW

An OSO member once suggested doubling up the holesaws.
Put a 4" inside a 5" and use the 4" for the pilot.
Similar to your idea.

Exactly what I did, works great.

dyno	06-29-2005 09:11 AM

Re: through hull holes for exhaust?

its realy not the diameter thats the problem its the angle of the stacks,last night I opened them up with a die grinder but in order to hit the hole center I'm going to have to make a 3/8" spacer for 3 out of 4 stacks. I dont know if the holes are off or the stacks are..... :mad:

All times are GMT -5. The time now is 07:08 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page