Offshoreonly.com - Oil Pan for BBC

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Oil Pan for BBC (https://www.offshoreonly.com/forums/general-q/106604-oil-pan-bbc.html)

TwinTurboStroker

06-28-2005 07:51 PM

Oil Pan for BBC

I need an oil pan for my build, can someone please point me to a decent vendor. I'm familiar with the main vendors within the classifieds.

Or if anyone has a factory 454/502 Mercruiser pan they want to part with let me know.

Thanks.

articfriends

06-28-2005 08:30 PM

Re: Oil Pan for BBC

I'm running a hardin 14 qt pan on mk 4 merlin block,its fit and finish are NOT impressive. I tried using a felpro 1 piece retro gskt originally and you could slide a .010 feeler gauge thru rail area into block,it would have leaked for sure. It needs a 1/2 tube of good RTV to even think about sealing,Smitty

hpy540

06-29-2005 07:17 AM

Re: Oil Pan for BBC

I have a used blasted perfect merc 10 qt pan for a gen 5/6
make me offer
email me [email protected]

TwinTurboStroker

06-29-2005 08:26 AM

Re: Oil Pan for BBC

Crud.

I'm running a Gen IV.

Quote:

Originally Posted by hpy540

I have a used blasted perfect merc 10 qt pan for a gen 5/6
make me offer
email me [email protected]

On a side note I picked up a Hamburgers 10 quart from Summit for $199. After looking at Milidon, Moroso, and Canton.

GPM	06-29-2005 04:28 PM

Re: Oil Pan for BBC

I've had good luck with the Milodon 12 qt offshore pan. You will probably lose oil pressure above 5500 rpm with a stock 8 qt.

All times are GMT -5. The time now is 09:31 AM.