![]() |
fuel tank plumming problem
I have two fuel tanks that need to be plumed to the gas caps on the deck. The problem is that my caps are 2 inch and the filler necks on the tanks are 2 1/4, if not a hair more. What would be the best way to connect these two up?
|
Re: fuel tank plumming problem
Maybe you could get some stainless 2" tube and take to muffler shop and have them swage it out to 2 1/4" and that will get u from one hose size to the other. They may have that item in stock with all the stainless systems they are installing on the tuner cars.
|
Re: fuel tank plumming problem
muffler shop, didn't think of that, thanks
|
| All times are GMT -5. The time now is 08:23 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.