single dominator tunnel ram
 

why is it that i can find single dominator sheet metal intakes and some single tunnel rams at steveschmidtracing at about 12,000 dollars, but then i see holley tunnel rams for about 400 with dual carb setups? where can i find a holley/weiand tunnel ram for 400 that uses a single dominator set up?

Re: single dominator tunnel ram
 

You could buy a Dart tunnel ram from Summit Racing and make a different top plate for it, but why do you want a single Dominator on a tunnel ram?

Re: single dominator tunnel ram
 

cuse i just bought 3 new dominator carbs for my engines and would rather keep the carbs and everything than have to buy 6 new carbs and flame arrestors etc.

Re: single dominator tunnel ram
 

You just have to change the top plate. E-Brock and holley have them.

Chris

Re: single dominator tunnel ram
 

ive been searching and cant find a single dominator top plate????? am i just blind or is there a website where i can find them or wut?

Re: single dominator tunnel ram
 

Unlike the other intakes, the top plate on the Dart is just that, a 1/4" aluminum plate. I think you can even buy them without any carb holes to do a custom setup.

Re: single dominator tunnel ram
 

i checked holleys and edelbrocks websites and found no such tihng as a single carb tunnel ram for a big block chevy.
tomcat: i found the dart manifolds and see how they can come with a blank top plate. its looks like the best choice right now, but what all is involved in cutting the plate for a single dominator? would i need a machine shop to do it?

Re: single dominator tunnel ram
 

Take the blank plate and a Dominator gasket to someone with a milling machine. Every machine shop has one. With a little measuring and marking they can mill and drill the carb and bolt holes in the center of the plate. When they're done it should look something like this.