Bravo 1 engine coupler
 

I was just cleaning up the bell housing and engine coupler, getting ready to install the engines after a rebuild... I noticed that one coupler's splines are sharp teeth rather than the nice square edges... I am going to be looking for one.. Can't afford new... The engine rebuilds are draining me...
I have the Famous... Bravo 1 drives.. around the 1988 Vintage.
Would a coupler from a bravo 2 fit a Bravo 1 drive?
Thanks much....
Quikdecision.

Re: Bravo 1 engine coupler
 

Well, if in doubt I would find the $$ to get a new one. If you bolt everything up and you blow the coupler it's going to cost a lot more. Don't know about the Bravo 2 coupler. You can compare the part numbers here......

http://www.mercruiserparts.com/

Re: Bravo 1 engine coupler
 

Ive got 2 good ones that will work if youre not using the through prop bullhorns. They are the early style made from aluminum plate. In very good shape. rogue2800 at Hotmail.com

Re: Bravo 1 engine coupler
 

Yes They Will Work Only Diiff Between Bravo One And Two Are In The Lowers

Re: Bravo 1 engine coupler
 

Thanks you guys, for the help....
Much appreciated... This site is Awesome...

Re: Bravo 1 engine coupler
 

try ebay :rolleyes: :rolleyes:

Re: Bravo 1 engine coupler
 

I have a used one from a HP500 with 90 hours for $100

Shawn