Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Prop help. (https://www.offshoreonly.com/forums/general-q/108487-prop-help.html)

gripit 07-25-2005 09:24 PM

Prop Selection Cig Bullet
 
Found these numbers on the prop. HC CL 22 L QIV & HC CL 22R QIV. They are 4 blade stainless steel. What brand are they? They are on an 88 Cig Bullet.

throttleup 07-26-2005 06:47 AM

Re: Prop help.
 
Those are Hydromotive Quad IV props, 22" pitch, right and left.

Matt

gripit 07-26-2005 08:28 AM

Re: Prop help Cig Bullet
 
If I wanted to upgrade, what would be your reccomendations.

GoCiggie31 07-26-2005 09:46 AM

Re: Prop help Cig Bullet
 

Originally Posted by gripit
If I wanted to upgrade, what would be your reccomendations.

Gripit,
Are those TRS drives you running in that Bullet? What rpm and speed are you getting with a light load on those props and at what rpm do you need to run your engine package w0t?

gripit 07-26-2005 09:51 AM

Re: Prop help Cig Bullet
 

Originally Posted by GoCiggie31
Gripit,
Are those TRS drives you running in that Bullet? What rpm and speed are you getting with a light load on those props and at what rpm do you need to run your engine package w0t?

Yes, they are TRS Drives. I'm getting about 60 mph with half fuel tanks. I have 420 HP's but don't know what rpm I need to run my engine at wot.

throttleup 07-26-2005 10:03 AM

Re: Prop help.
 
Can you tell me about your performance numbers.

What motors do you have?
What is your WOT RPM with the 22P QIV's?
What is your WOT MPH via GPS?
What is your gear ratio?

Julie

GoCiggie31 07-26-2005 10:12 AM

Re: Prop help Cig Bullet
 

Originally Posted by gripit
Yes, they are TRS Drives. I'm getting about 60 mph with half fuel tanks. I have 420 HP's but don't know what rpm I need to run my engine at wot.

I hear the hp420 like 5200-5400 rpm range at WOT,
I would guess your gear ratio (unless changed is 1:5) what rpms do you run at wide open throttle when you have those hydros installed?

gripit 07-26-2005 10:22 AM

Re: Prop help.
 
I'm not sure the RPMs, I will have to wait for the weekend. The 5200-5400 range sounds right for the HP 420's.


All times are GMT -5. The time now is 10:46 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.