looking for BBC heads casting #990
#11
Registered
Re: looking for BBC heads casting #990
Originally Posted by guillermof
Thanks everyone i have plenty of cracked ones.
ScarabScoundroul how much for the one that is not cracked maybe this way i can make one pair for someone that needs a set.
i have decided to go with merlin heads. I am afraid that if this many are cracked their is a problem.
birdog are both of them cracked.
ScarabScoundroul how much for the one that is not cracked maybe this way i can make one pair for someone that needs a set.
i have decided to go with merlin heads. I am afraid that if this many are cracked their is a problem.
birdog are both of them cracked.
#15
Registered
Thread Starter
Join Date: Nov 2000
Location: Dayton,OH/LakeCumberland,KY
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Re: looking for BBC heads casting #990
ScarabScoundroul
i end up with four out of eight heads being good so i am set but thanks for the help.
i end up with four out of eight heads being good so i am set but thanks for the help.
#17
Registered
Join Date: Jul 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: looking for BBC heads casting #990
FYI the 990 castings have cast in valve seats and the 188 casting have pressed ln valve seats.The problem is that if the 990 heads need seats when the try to cut them out 9 times out of 10 you hit a water jacket.So in my opinion the 188's are better than the 990's for the simple fact that they are easier to rebuild.
#18
Registered
Re: looking for BBC heads casting #990
I don't need a match. I replaced my heads last year. I'm only asking because someone else has found my head as a match to thiers. So I was wondering what I should sell it for. I had a friend that feels it's worth $300. ? ? ?
#19
Re: looking for BBC heads casting #990
I have 1 990 head that is decent. Not rotted out , not ported, but needs rebuild. Make offer. Just threw four on the scrap pile Just went for New Dart. Beware of used dart heads. Early castings did not have the cast in struts where they eliminated the exhaust crossover, and are prone to cracking. Dart heads are cnc ported. They are heavy too. Really thick decks, etc... I couldn't believe the difference when I went to pick one up. BBB