Got a big oil filter onto a '96 454 MAG!
#1
Registered
Thread Starter
Join Date: Jun 2005
Location: Springfield, VA
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
Got a big oil filter onto a '96 454 MAG!
After a few trips to the store and no luck finding a short enough oil filter for my '96 454 mag, I went to the hardware store and got some longer SS bolts and nuts. I raised the remote filter holder up about 1 1/2 inches and now I have room for a big-boy sized 302 Mobil 1 filter.
I also installed a Fram quick drain fitting to the oil pan so next time I can hook a hose up to it. This time around I dumped the oil out the bilge into a drain bucket. Not too messy to clean up but I don't want to do it again.
I also installed a Fram quick drain fitting to the oil pan so next time I can hook a hose up to it. This time around I dumped the oil out the bilge into a drain bucket. Not too messy to clean up but I don't want to do it again.
Last edited by zimm17; 08-03-2005 at 12:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
JeffGrice
General Q & A
10
08-09-2003 09:38 AM