Clamp on mufflers
 

I e-mailed Gibson but never got a response. As much as I hate the idea I will have to use mufflers on some area lakes. Will I have to change my slash cut tips or cut mine flat in order to use clamp on mufflers?

Re: Clamp on mufflers
 

Talk to Graham at GGB

Re: Clamp on mufflers
 

My prices can't be beat on GGB's! I've got 4", and 4 1/2" clamp ons in stock. You don't need to cut your tips, the clamp ons should work fine as they are. Let me know I can have them in your hands by Tues!

Fionn
[email protected]
925.952.4240
510.541.8124

Re: Clamp on mufflers
 

Some pics of the transom mounts

Re: Clamp on mufflers
 

Clamp on.

Re: Clamp on mufflers
 

anasazi,

I fought the mufflers for a long time. I finally put on a set of GGB Extremes. I had no power loss and the motor still sounds great. BTW, my motor is an NA 540, dry CMI's. All from Fred @ TrickMarine

Re: Clamp on mufflers
 

Thanks for the input so far. My concern is; my tips measure 9 1/2" on the top and 5" on the bottom. Thats a 4 1/2" difference. If I'm going to get at least 3" of the bottom part of the pipe in, that means 7 1/2" of the top has to enter the muffler. Is that possible, and if so, wouldn't it interfere with the baffles?

Re: Clamp on mufflers
 

If your interested, I have access to a brand new set of 4" GGB Extreme clamp ons that you can have for $650 shipped. These are brand new in the box and have never been put on.
Dave
PM if interested.

Re: Clamp on mufflers
 

Anybody check egt's after adding the GGBS mufflers?

Re: Clamp on mufflers
 

anasazi, I'm no expert but I doubt that anyones clamp ons will work with your tips without cutting them off staight. Most clamp-ons "eat-up" less than 3" of your tips before they bottom out on the baffles. Don't forget that most mufflers are around 9-10" in lenght so I think you'ld want to trim the tips so your total lenght doesn't get out of hand! Steve