Tabs leaking water in bilge
#1
Registered
Thread Starter
Join Date: Apr 2005
Location: South Bend IN
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Tabs leaking water in bilge
I have a 1988 boat. It has never been in the water for more than a weekend. The tab on the port side was dripping water into the bilge through the mounting bolts. I tightened them up and clear water sqeezed out of the bolt holes. Transom did not feel spongy at all. Should I worry??
#2
Charter Member #30
Charter Member
Re: Tabs leaking water in bilge
Yes! Take them off and make sure the holes are dry If water "squeezed" out you know the answer. If you are lucky and the transom holes are dry re-install the bolts with lots of 3M 4200.
Best of Luck
Best of Luck
__________________
I have Steps & Bubbles!
I have Steps & Bubbles!
#3
Registered
Thread Starter
Join Date: Apr 2005
Location: South Bend IN
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Re: Tabs leaking water in bilge
Originally Posted by Scott
Yes! Take them off and make sure the holes are dry If water "squeezed" out you know the answer. If you are lucky and the transom holes are dry re-install the bolts with lots of 3M 4200.
Best of Luck
Best of Luck