Searching - Used 502 out there?
Anyone have a (or know someone) with a used 502? Please let me know....
thanx |
Re: Searching - Used 502 out there?
Originally Posted by Shooter
Anyone have a (or know someone) with a used 502? Please let me know....
thanx |
Re: Searching - Used 502 out there?
just for the helluvit what are you asking for it?
|
Re: Searching - Used 502 out there?
I have a 454 Magnum MPI if interested.
|
Re: Searching - Used 502 out there?
I've heard there are a few on Ebay lately?
Ray @ Raylar |
Re: Searching - Used 502 out there?
Originally Posted by Shooter
just for the helluvit what are you asking for it?
MSD complete marine system Deluxe Ignition Package "Deluxe" MSD / Hardin Ignition Package - Chevy V8 (1) Billet Marine Distributor (1) MSD 6-M Series Multi-Spark Ignition Control Box (1) High Vibration Coil (1) Soft Touch Ignition Rev Control (1) Deluxe Polished Stainless Steel Cylinder Head Mounting Bracket (1) Custom Fit 8 MM Heli-core Spark Plug Wire Set (1) Red Billet dist. hold down and stud The Motor,Long Block Gen VI four bolt main block, with forged pistons, forged 4340 steel connecting rods with 7/16" bolts, a 1053 forged steel crankshaft , Blue printed high volume oil pump , Dually 10 qrt. with windage tray and scrapper , Comp Cams XR300 Hr Hyd. roller cam shaft Exh. lift .254 / .580 Int. lift .248 / 560 , roller Lifters ,Comp Cams SST roller rockers, Comp cams stud girdeles, pushrods Complete valve train . Comp Cams true roller timing set ,Edelbrock 6045 alum heads ported and polished by R&R Machine In Napa Ca,Stainless steel 2.19" intake and 1.88" Polished alum. timing cover , polished alum. crank pulley , SFI approved flex plate.Aluminum exhaust with center risers,Edelbrock single plunum manifold. |
Re: Searching - Used 502 out there?
Originally Posted by wkd1
$6000.00
MSD complete marine system Deluxe Ignition Package "Deluxe" MSD / Hardin Ignition Package - Chevy V8 (1) Billet Marine Distributor (1) MSD 6-M Series Multi-Spark Ignition Control Box (1) High Vibration Coil (1) Soft Touch Ignition Rev Control (1) Deluxe Polished Stainless Steel Cylinder Head Mounting Bracket (1) Custom Fit 8 MM Heli-core Spark Plug Wire Set (1) Red Billet dist. hold down and stud The Motor,Long Block Gen VI four bolt main block, with forged pistons, forged 4340 steel connecting rods with 7/16" bolts, a 1053 forged steel crankshaft , Blue printed high volume oil pump , Dually 10 qrt. with windage tray and scrapper , Comp Cams XR300 Hr Hyd. roller cam shaft Exh. lift .254 / .580 Int. lift .248 / 560 , roller Lifters ,Comp Cams SST roller rockers, Comp cams stud girdeles, pushrods Complete valve train . Comp Cams true roller timing set ,Edelbrock 6045 alum heads ported and polished by R&R Machine In Napa Ca,Stainless steel 2.19" intake and 1.88" Polished alum. timing cover , polished alum. crank pulley , SFI approved flex plate.Aluminum exhaust with center risers,Edelbrock single plunum manifold. |
Re: Searching - Used 502 out there?
Originally Posted by vandeano
If I only knew this 2 months ago....where in California? Any where near Manhattan Beach?
|
Re: Searching - Used 502 out there?
got one on my lift, but its surrounded by a boat. heck you might as well buy the whole package :D
|
Re: Searching - Used 502 out there?
looking for stock only. Hey if that were the case I got two for sale with the boat. Ebay gives me the heebee geebees. I buy and sell lots of small computer stuff. I'd be afraid of a ripoff.
|
Re: Searching - Used 502 out there?
Try Bill's Marine in Ft. Lauderdale. (954) 462-1904.
|
Re: Searching - Used 502 out there?
Have 2 HP 465's Gen 4 Bowtie,502's $4500.00ea 500 hrs complete, freshwater, should rebuild.
Doug PS please don't ask for pics, they are black |
Re: Searching - Used 502 out there?
wkd1, looks like a nice motor, what CC are the heads intake and combustion chamber. What's the Comp Ratio, How fresh is this?
|
Re: Searching - Used 502 out there?
Originally Posted by Jgray
wkd1, looks like a nice motor, what CC are the heads intake and combustion chamber. What's the Comp Ratio, How fresh is this?
The inatake manifold is the one that the carb is turned...Older victor style. Comp ratio should be 9.6 with these heads Part# 60459Int. port vol.290cc Exh. port vol. 110cc Chamb. vol. 110cc Deck thickness-9/16 Int. valve size 2.19 Exh. valve size 1.88 Valve spring dia. 1.55 Rocker stud dia. 7/16 Pushrod dia.(A) 3/8 Max. Valve Lift .700 " Bolt Torque (G) 70 Heads include top-quality ARP rocker studs, bronze guides and hardened, ductile iron valve seats. |
Re: Searching - Used 502 out there?
I have a pair 4-6 hrs on them.Professionaly built $2400.00 just in the heads! Compression about 8.75:1 Long blocks w/ all the good components, ported dart intake to Gil. pans. Including flywheels and balancers P.M. me or call me 614 205 5401
|
Re: Searching - Used 502 out there?
Just saw an ad in my local paper this morning classifieds. (2)502 MAGS EFI $14,000 And also (2) 7.4L 330hps $4,500 pr both. 920-426-1402 920-203-3411 In the APPLETON,WI PAPER SO SHOULD BE FRESHWATER ENGINES.
|
Re: Searching - Used 502 out there?
There's a gent here in Glen Burnie that has a 500 EFI with around 75 hours on it I believe he said for around $6500.00. I think it needs a few brackets or so.
John S. :D |
All times are GMT -5. The time now is 09:30 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.