Mesa MB650na weekly project
 

Here is a couple of pics of a friends engine were finishing up he opted for the aluminum heads instead of Iron and all the goodies in the valve trane and the bottom like always only the best American made stuff no imported parts it's going in a 26 footer going to be lots of fun . I'll post the dyno numbers as soon as I have them available and if anyone knows how to post video I can post the dyno video. Here is the block with the rings all filed fit individually to each cyl. the pistons after massaged weighed and debured also the heads checking spring press and installed height.

Re: Mesa MB650na weekly project
 

here are some pics after cc'ing the heads and the Jesel components cleaned ready for assembly and the short block assembled with the cam degreed and ready for pan to go on. Hope you guys like.

Re: Mesa MB650na weekly project
 

Laz,
Those look like Morel lifters?

Chris

Re: Mesa MB650na weekly project
 

Laz,
Is this a new package you will be offering in between your 600 and 700?

Re: Mesa MB650na weekly project
 

Chris these lifters are Cam Motion and they are made by John Callies that use to make the Callies cranks . I've never used the Morels I'd like to do so testing with them since you told me you were reping them I've just been so busy I haven't had time to bother you about them.

Re: Mesa MB650na weekly project
 

The 550 650 and 750s are numbered that way when they have aluminum heads when they are iron heads they end in 00 just a way for me to keep track.

Re: Mesa MB650na weekly project
 

Can someone tell me how to post a video of the dyno work

Re: Mesa MB650na weekly project
 

www.putfile.com
or
www.gig.com

No porn on putfile:( :drink: