XR Spacers
 

I have one inch spacers in my XR drives now and Julie tells me to go to 2 inch.

Can I buy another one inch kit and stack it on or do I need to buy a 2 inch kit which is more money?

I think in addition to the spacers, I need longer studs and a longer coupler for the drive shaft. How about shift shaft?
Anything else I need?

I'll probably do the labor myself. Any tricks?

Thx - JON

Re: XR Spacers
 

I dont know about the 1" to 2" spacer if you can add two of them together or not. However, if you have to replace your spacer with at 2" kit, I will buy your 1" spacer kit from you because Julie is telling me that I need a 1" spacer on my drive.

Just let me know if you want to get rid of the 1" spacer kit.
Rodney

Re: XR Spacers
 

JNewton - I posted this in your other thread as well, but I might have a set of 2" spacers that I don't need. I want to try 3" spacers on my boat to see how they work.

Re: XR Spacers
 

OK Rodney! Give me a contact email or phone number. I hope to decide soon.

Thanks - JON

Re: XR Spacers
 

I am looking for at least a one inch spacer for a single but would also do a 2 inch or 1,5 inch spacer depending what was available. Any sellers out there? greg