Offshoreonly.com - Mark IV vs. Gen VI

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Mark IV vs. Gen VI (https://www.offshoreonly.com/forums/general-q/111774-mark-iv-vs-gen-vi.html)

Mike Paula

09-06-2005 12:12 PM

Mark IV vs. Gen VI

Ok I am replacing a 1990 330 hp 454 Mark IV with a Gen VI motor that is externally balanced. I am sure I need new a flywheel. Can’t seem to find the right pt PN for it. Any one have the part number or a flywheel for that mater? Am I corect in the Mark IV are Internally balanced? Also is the Adapter for the Oil cooler/ remote filter different ( part at the block) different?
thanks
Mike

1BIGJIM

09-06-2005 12:25 PM

Re: Mark IV vs. Gen VI

It's externally balanced. Yes the remote filter adapter is different.

Mike Paula

09-06-2005 01:53 PM

Re: Mark IV vs. Gen VI

Called Teague. they have one. 249 for a flywheel...geez. On its way. Also found the Right adapter from CP... thanks

pachangalpina

09-06-2005 02:59 PM

Re: Mark IV vs. Gen VI

Eventhough they both may be externally balanced, I believe they have different crank shaft flanges which means the bolt pattern on the flywheels are different.

Filter adapters are different.

All times are GMT -5. The time now is 09:38 PM.