Who says Prochargers can't be impressive?
 

This is just a prototype Intercooler built by me with Steve Morris Racing.....Nothing fancy Dart 572, Dart cast heads (no porting) mild hyd roller cam, 850 Holley M-4 Procharger...on pump gas (92)
I hope the dyno sheet comes thru....I had trouble getting it to size

Re: Who says Prochargers can't be impressive?
 

You can't make any HP with a Procharger!

Re: Who says Prochargers can't be impressive?
 

Nice to see others joining the ranks of the enlightened...:D

Seriously though, it is difficult to get enough intercooler core in the right place when blowing through a carb. We fit a 468 in3 core in our carb box, but after that you have to go up. Looks like you were able to get a big core in there.

The other way is to switch to EFI which gets the carb out of the way and allows a really big core on top of a modified tunnel ram.

Say Hi to Steve and keep up the good work over there. How far are you guys from Sterling Performance in Milford, MI? I will be over there later this month and would like to hook up if feasible.

Tom

Re: Who says Prochargers can't be impressive?
 

Ludington??!! I thought there were only fishing boats and cruisers in Ludington. :D
Welcome to OSO. We've been going to Pentwater,off and on, for 30 years. I love it up there.

Very cool looking setup. good luck on the dyno.

Re: Who says Prochargers can't be impressive?
 

Hey Randy,
VERY NICE JOB!! Looking pretty awesome!! So is that thing in the boat yet?? Nice numbers also..

Dick

Re: Who says Prochargers can't be impressive?
 

Looks nice

Re: Who says Prochargers can't be impressive?
 

Do you have a boost curve with that graph?

Re: Who says Prochargers can't be impressive?
 

Very nice if you have the hatch clearance for it. I wish I had known about the R-tech cooler when I did my last procharger install. I would not have been able to use your prototype because of the height, but it certainly is impressive. The procharger sure woke-up the 28 Warlock SXT.(GPS-103 MPH with a stock 500 HP.

Re: Who says Prochargers can't be impressive?
 

Tomcat....Steve is 2.5 to 3 hours from Sterling,. Steve Morris is
east of Muskegon.

I have included more dyno numbers .

Wrenchman....The height is only 1" higher than my 454 w/B&M
Blower and suppressor....part of this from tall deck 572, Some height could be reduced by lower intake manifold

Re: Who says Prochargers can't be impressive?
 

Rotation