Mercury/Quicksilver Spanner Wrench... B1 Trim Cylinder End Cap Removal
 

Tool needed to remove the end cap of a B1 Trim Cylinder:

Merc P/N : 91-821709

I don't have any spanner wrenches; never even used one. Can this be picked up as a Craftsman or Snap-On part?

Thanks!

Re: Mercury/Quicksilver Spanner Wrench... B1 Trim Cylinder End Cap Removal
 

Brian, nothing special about spanner wrenches. Pick up an adjustable one over a fixed one. Just make sure the pin dia's are not to big for what you need. There are different sizes. I don't know what size you need off hand.

http://www.sears.com/sr/javasr/produ...table+Wrenches

You can make a cheap and dirty one using bolts for the pins. ;)

This is a 6 year old post, and if you can remember, did you use an adustable spanner to get the end cap off?

Sorry, it is only a 2 year old post.

I made one and you can use it if you like. [email protected]

an adjustable spanner will work fine, just use the right size, put it on the ram and tap it with a mallet.