Hot Block for inboards.
 

I have a friend who is in Detriot developing a new system for your cooling system. It is protect your engine's life and has been tested on a 684 h.p. carberated motor and in four years of running 8000 rpm's everytime the driver gets in the boat the is almost no wear on the bearings or rings. Leak down is not even a question. Compressoin is down 1or2 pounds from original.

My questions is would you be intrested in this system? If so what would you be willing to pay for said system. The labor has to be completed by a machine shop due to some issue's with the heads. So that is seperate,some guys can install it themselves. The engine does not have to come apart. Just come out. Or we can intsall the system near Chicago or Detriot. Thanks again.

Bill

There will be more data later but I am just trying to get a feel for what market we would have.

Re: Hot Block for inboards.
 

Ttt

Re: Hot Block for inboards.
 

I will take the bridge and some swampland to go with that.

Interest in what? 8000 RPM regular use and four years. Even less wear if the drive does not get in the boat? Cooling huh, cool my wallet...