Offshoreonly.com - ZZ502/502 aluminum heads

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - ZZ502/502 aluminum heads (https://www.offshoreonly.com/forums/general-q/116362-zz502-502-aluminum-heads.html)

Kidnova

11-13-2005 11:51 AM

ZZ502/502 aluminum heads

Been talking to a forum guru about upgrades on my ZZ502 and would like to go with better AM heads.

Any idea what a set of used ZZ502 heads are worth? They have about 130 hours on them.

Thanks

racin fever

11-13-2005 01:38 PM

Re: ZZ502/502 aluminum heads

try street roders those heads are only good for low &mid range torque

Mike Paula

11-13-2005 02:38 PM

Re: ZZ502/502 aluminum heads

I have seen then go for about $1500.00 if there complete. They are the same as the Edelbrock RPM's and the will be pick up pretty quickly by the hot rodders.
Mike

Kidnova

11-13-2005 03:03 PM

Re: ZZ502/502 aluminum heads

I'm "on the fence", deciding between a bigger boat, and upping the power in our current Wellcraft 23 Nova.

If I decide to keep the Nova and go with engine upgrades, the heads will go complete with the SS valves, springs, & rockers. I plan to replace intake, cam, lifters, and push rods also. The engine runs perfectly so I'm sure the parts mentioned are all in good condition.

Is there a particular/good web site to list the heads on?

Thanks for the input.

All times are GMT -5. The time now is 04:34 AM.